FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 17 of 22 FirstFirst ... 7 15 16 17 18 19 ... LastLast
Results 161 to 170 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #161
    Senior Member
    Join Date:  May 2011

    Location:  Flekkefjord, Norway

    Posts:    128

    My VIN:    # 00712 (ex-Howard Hughes) # 03692 # 03980 # 05414 # 06759 # 06833 # 06975

    Club(s):  

    Fuel Gauge

    Hi Jim, excellent project; looking forward to the final result :-)
    I can tell you that the metric cluster does indeed have the "unleaded fuel only" print + the bottom segment in red.

    Curiously enough, it does not have the "fuel" print at all! So it would be nice if you could add that to a couple of clusters :-)

    Best wishes
    Stian Birkeland
    Norway

    VIN # 06759


    Quote Originally Posted by dmc6960 View Post
    Who would have thought finding a high resolution image or vector image of the STANDARD International Automotive Fuel Gauge symbol would be so hard?

    Well it is. So I have to make my own. Spent less than an hour making the gauge, including the characters for FUEL. Then the entire rest of the evening drawing out the fuel icon by hand. I do think though the results speak for themselves....

    Attachment 10358

    "UNLEADED FUEL ONLY" will follow later for the final prints. Since its an irrelevant statement these days, perhaps I'll have an option to omit it. I know the metric cluster has the bottom segment in red, does it still carry the Unleaded text?

  2. #162
    Senior Member
    Join Date:  May 2011

    Location:  Flekkefjord, Norway

    Posts:    128

    My VIN:    # 00712 (ex-Howard Hughes) # 03692 # 03980 # 05414 # 06759 # 06833 # 06975

    Club(s):  

    Fuel Gauge

    And ... it's also missing the "VOLTS" print, the "TEMP" print and the "OIL" print...

    Best wishes
    Stian Birkeland
    Norway

    VIN # 06759


    Quote Originally Posted by dmc6960 View Post
    Who would have thought finding a high resolution image or vector image of the STANDARD International Automotive Fuel Gauge symbol would be so hard?

    Well it is. So I have to make my own. Spent less than an hour making the gauge, including the characters for FUEL. Then the entire rest of the evening drawing out the fuel icon by hand. I do think though the results speak for themselves....

    Attachment 10358

    "UNLEADED FUEL ONLY" will follow later for the final prints. Since its an irrelevant statement these days, perhaps I'll have an option to omit it. I know the metric cluster has the bottom segment in red, does it still carry the Unleaded text?

  3. #163
    Senior Member Dangermouse's Avatar
    Join Date:  May 2011

    Location:  Atlanta OTP GA

    Posts:    7,085

    My VIN:    2743

    Club(s):   (SEDOC) (DCH) (DCUK) (DOC-UK)

    Modern cars have a little triangle beside the pump symbol that points to the side of the car that has the gas flap. Any thoughts about adding one pointing to the left, or would that be out of character?

    And would having it pointing to the front of the car instead, be too geeky?
    Last edited by Dangermouse; 05-12-2012 at 09:49 AM.
    Dermot
    VIN 2743, B/A, Frame 2227, engine 2320

    I don't always drive cars, but when I do, I prefer DeLoreans

    http://www.will-to-live.org

    No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"

  4. #164
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Oil Gauge

    We're really cookin' with oil now! An oil gauge that is...

    OilGauge.jpg

    After learning additional functions of the drawing program I'm using (Inkscape) last night for the Fuel icon, the Oil icon was much easier to draw by hand today.

    Also had to make an S, hadn't done that yet. The 3 middle markings are each an additional and progressively 2.5ยบ turned CCW.

    I think I'll go do some needed work on the actual car now after some lunch.
    Jim Reeve
    DMC6960

  5. #165
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by Dangermouse View Post
    Modern cars have a little triangle beside the pump symbol that points to the side of the car that has the gas flap. Any thoughts about adding one pointing to the left, or would that be out of character?

    And would having it pointing to the front of the car instead, be too geeky?
    It would probably be out of character. I'm trying to keep the appearance as close to original as possible. If I do something not exactly original to the cluster, it will still keep the same look and feel of the original cluster. The most prime example I can think of this are the speedometers. The 140mph unit may not have been installed in over 99% of the cars, but there was the factory desire for it if not for the US regulation. Also the visual appearance of the 240km unit does not completely match the rest of the typeface, I hope to correct this with the KM version. The only major departure from the original should be the odometer/trip meter.
    Jim Reeve
    DMC6960

  6. #166
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by dmc6960 View Post
    It would probably be out of character. I'm trying to keep the appearance as close to original as possible...
    i had the same sentiments. while Dermot's suggestion is valid, i dont think it would quite fit with the originality.

    also, i hope whoever is responsible for fueling up the DeLorean would know enough about it to know where the filler neck is!
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  7. #167
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Jim, those decals look amazing. You have such a huge amount of dedication to the project! I can't wait to see the finished product. Great work.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  8. #168
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,432

    My VIN:    05457

    I continue to be blown away by this project. The attention to detail is amazing. I can't see this project being anything other than a success.
    David Proehl

  9. #169
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    +1. i think were really privileged to have such a talented, diverse community willing to develop these labor-intensive, small-batch projects.

    take a bow, gents!
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  10. #170
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Volt Gauge

    And now for my latest creation, the Volt Gauge!

    VoltGauge.jpg

    Perhaps yet tonight I can complete the Temp gauge.

    Thanks for all the support folks!
    Jim Reeve
    DMC6960

Page 17 of 22 FirstFirst ... 7 15 16 17 18 19 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •