FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 21

Thread: Otterstat crossover/interchange

  1. #11
    LS1 DMC Nicholas R's Avatar
    Join Date:  Jun 2011

    Location:  Orlando, Florida

    Posts:    2,734

    My VIN:    01643

    Club(s):   (DCF) (DCO) (DCUK)

    Quote Originally Posted by DeLorean03 View Post
    Get the crossover part and give it a try. Can't hurt....
    Famous last words about a part that determines whether or not the cooling fans activate...

    ;-)

    Seriously though it will probably work fine. Honestly if you're buying from Hervey then you're probably already buying the Volvo cross over. I'm sure that's where he gets his; especially the ones that activate at different temperatures.

  2. #12
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    Quote Originally Posted by Farrar View Post
    True enough. I thought you meant the seal for the otterstat when you said "o ring." If you need more than one part, then Dave & Julee are your source.
    I did. I needed the otterstat and the intake o ring and gasket set. Is the 3.0 eagle premier engine the same?

  3. #13
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by galbiati View Post
    I did. I needed the otterstat and the intake o ring and gasket set. Is the 3.0 eagle premier engine the same?
    Which gaskets? Timing cover? Valve cover? Not the same in either case, I think.
    3.0L, automatic, carbureted

  4. #14
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    Quote Originally Posted by Farrar View Post
    Which gaskets? Timing cover? Valve cover? Not the same in either case, I think.
    I thought the 3.0 eagle/monaco blocks were the same as the 2.8, only difference was the sleeve size.

  5. #15
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by galbiati View Post
    I thought the 3.0 eagle/monaco blocks were the same as the 2.8, only difference was the sleeve size.
    Not sure. I've never seen a 3.0L up close. Someone else here should know this. Let's wait for them to pipe up.

    Or you could give Dave a call...
    3.0L, automatic, carbureted

  6. #16
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    Quote Originally Posted by Farrar View Post
    Not sure. I've never seen a 3.0L up close. Someone else here should know this. Let's wait for them to pipe up.

    Or you could give Dave a call...
    I justwant to get this water pump on and the engine back together. I have had the car since early Dec and between the weather and the interior being in shambles when I got it, I just want to drive it already.

  7. #17
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by galbiati View Post
    I just want to drive it already.
    We all know how this feels...
    3.0L, automatic, carbureted

  8. #18
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    Quote Originally Posted by Farrar View Post
    We all know how this feels...
    I have specialtauto's water pump kit #1. The only parts that he forgot to give me are the INTAKE MANIFOLD O-rings, Y-PIPE O-rings, and 2 small paper gaskets. Oh, and the otterstat. I'd like to change that out before I filled the coolant.

  9. #19
    LS1 DMC Nicholas R's Avatar
    Join Date:  Jun 2011

    Location:  Orlando, Florida

    Posts:    2,734

    My VIN:    01643

    Club(s):   (DCF) (DCO) (DCUK)

    Quote Originally Posted by galbiati View Post
    I have specialtauto's water pump kit #1. The only parts that he forgot to give me are the INTAKE MANIFOLD O-rings, Y-PIPE O-rings, and 2 small paper gaskets. Oh, and the otterstat. I'd like to change that out before I filled the coolant.
    Feel free to contribute to this thread, lol :P :
    http://dmctalk.org/showthread.php?60...ghlight=hervey

  10. #20
    Vin3299's Doc DeLorean03's Avatar
    Join Date:  May 2011

    Location:  Eglin AFB, FL

    Posts:    1,603

    My VIN:    3299

    Quote Originally Posted by galbiati View Post
    I have specialtauto's water pump kit #1. The only parts that he forgot to give me are the INTAKE MANIFOLD O-rings, Y-PIPE O-rings, and 2 small paper gaskets. Oh, and the otterstat. I'd like to change that out before I filled the coolant.
    If that is all you need, order it from DMCMW. You'll have your stuff by Thursday (more than likely), and you can get the engine back together. You sure you don't also need the O-ring that goes in the very middle of the intake manifold where the cold start valve pipe sits on top of ? Just making sure you're covered!

    Not to sound like a jerk, but this weather (Dec to early March) is definitely NOT what I'd be wanting to drive my DeLorean in. To a certain extent, you should look at this timing as a real blessing - doing all this work while the weather sucks. If this was late April/early May and you were at this point, yes, I sure would agree with you. But days when the high is 23, yeah, I'd be WAY happier to be in (and actually am currently in) your position.

    Just politely trying to make verbal lemonade out of lemons (:.


    Quote Originally Posted by Nicholas R View Post
    Feel free to contribute to this thread, lol :P :
    http://dmctalk.org/showthread.php?60...ghlight=hervey

    *snickers at the tongue face*

    You are so bad .... xD...
    DMCTalk.org Moderator

    Actual snippet of a conversation from Sept 2013:

    Me: Eddie, I can't wait to get the car back when you're done with it.

    Eddie: Yeah, you'll be able to give the car gas, and it won't be - like - embarrassing....

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •