FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
EFI'd
Frustrating Fuel Problem!
Here we go again - I go from trying to fix my cold start valve to now my fuel pump. Weeks ago I could start my car (after pouring gas down the intake) and drive off into the sunset. I fixed my cold start valve and after that, my fuel pump wont work. It will come on after I let the car sit for a while - I can jump the RPM relay and it is on but as soon as I turn the key to engage the starter it shuts off! I unplug the jumper for the RPM relay and it sparks showing that there is voltage going to the pump, but it just doesn't run. I can take the pump out, hook it to a battery and it will run all day. What the hell? I took everything out of the tank and cleaned everything including the tank - the filter (which isn't dirty after many years-thanks John Hervey) and everything else in there.... My bulkhead connectors are clean and making contact now even though they will soon be replaced. What am I missing? I'm in this now about 5 hours and a six pack... My fuel pump is old, maybe 4 years but it has never missed a beat. I am running the one ballast resistor (everything was from SpecialT) and I did wrap up the wiring with new tape but didn't mess with any connections aside from cleaning. Any thoughts?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules