FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member

Originally Posted by
Farrar
Gas cylinder: $11. Soldering/brazing torch: $35. Battery crimp tool: $231.
Soldering method looks a lot better to my wallet.
Farrar
I bought a propane cylinder with head and a decent sized tank for ~$25, and honestly you can get away with a regular crimper and brute force. Alternately you could use a bench vise - not sure how much they are but I know there are crimping tools you can put in a vise.
I just used a set of regular wire stripper/crimpers. One terminal I couldn't quite get crimped enough so I stuck it in the corner of the vise and pinched it a little farther.
Don't really need anything fancy for this particular job.
Alternately you could probably rent or borrow a battery crimp tool from advance or whatever's closest.
Trust me this job is well worth it, just for the peace of mind.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules