We re-installed the compressor. After we mounted the compressor we turned it over a few times by hand.
I decided to go with the DMCH accumulator rather than the D-go one. The LP switch we have has a schrader core depressor. I don't just assume that this arrangement will work. Ask me why.

I would never try to swap out the LPS with pressure on the system so I decided to just remove the schrader core.
Unfortunately, this didn't go well. It loosened up but it wouldn't come out no matter what.

So I screwed it back in.
I installed the oring with a light coat of PAG oil then installed the switch.


Sent from my SM-S928U using Tapatalk