FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
By the way on the dome lights. The rear mounting material is a little to thick for the end latches to pull the dome light tight. You can thin the material a little with an exacto and it helps. I ended up using a few drops off hot glue anyway. You pull the rear panel off and you can get at the inside enough to see whats going on. Now the front dome light holds tight with no modification.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules