FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
EFI DeLorean
Digital Odometer
So my 7-segment LED samples came in today. These units have 7.6mm (.30") high characters. This slightly exceeds the actual vertical opening of the stock odometer cutout. Unfortunately the width of the units lined up together more than slightly exceed the odometer opening, by 8mm. These units are some of the narrowest I can find. Most of the 7mm and 5mm 7-segment displays I've found actually are slightly wider. Unfortunately, nothing beneficial is gained from 2 or 3-digit units either. I have found one manufacturer of a 5mm unit which is only 6.9mm in width. This would put the total width at 41.4mm, still exceeding the stock 36mm but slightly better than the 44mm I have now. Another concern about the small size of these are the ability to solder them. The super small units are all surface-mount devices with incredibly small contacts. Designed for "reflow" soldering on a manufacturing line. Not hand soldering in someone's workshop. While browsing many of the manufacturer's websites, a lot of them advertised "ask us about custom units, at affordable prices". So I'll throw a few feelers out there for a single 6-digit unit which perhaps can be made a little more compact than individual units. We'll see. Once I have the vector graphics completed for the speedometer I may also play around with slightly enlarging the scale to make the units I currently have fit with an OEM look. If this looks OK, I'll enlarge every gauge, print out some quickie samples, and lay them over my spare cluster. So I have several options to pursue here.
Here are the photos of the 7-Segment lineup...
photo 3.jpgphoto 1.jpgphoto 2.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules