A lot. Removed all the interior panels and carpeting in prep for dynamat installation tomorrow. Installed my LMS bypass relay kit. Reinforced my armrest extensions so they won't snap off. Re-stretched and re-glued the vinyl on the rear interior quarter panels so they aren't bubbled up. Removed the driver's side louver that wasn't held on by anything, cleaned up the old glue and got it ready to re-attach. Epoxied the upper seatbelt anchor in place (it was spinning in the hole, probably why the side lover was removed in the first place). Put the battery on an overnight charge cycle. Cleaned all the interior fiberglass to get a good bond surface. Tomorrow will be installing the dynamat and putting back as many interior panels as possible, and maybe shampooing the carpets while they're out if there's time.