FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 305 of 954 FirstFirst ... 205 255 295 303 304 305 306 307 315 355 405 805 ... LastLast
Results 3,041 to 3,050 of 9533

Thread: What have you done to your DeLorean today?

  1. #3041
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    I finished my front brakes caliper rebuilds. New pistons, pads, hardware, clips, seals and fluid, while cleaning up the calipers and reusing them.

    Everything is reassembled and reinstalled, but judging by the weather and the salt, sand, and snow on the roads, my test drive to see if the difference is noticeable might be waiting until March.

    Such is life how we so often take for granted, but not advantage of, things when we can, yet long for the day to have them again when we can't or they are gone.

    My big ole box of "to be installed" parts is thankfully getting smaller though. I just need to keep reminding myself to enjoy the car before those boxes are empty.


    Sept. 81, auto, black interior

  2. #3042
    Senior Member rdarlington's Avatar
    Join Date:  Aug 2013

    Location:  Los Alamos, NM

    Posts:    266

    My VIN:    10904

    I installed a set of front speakers and uploaded a picture to Amazon so people know they fit. Since Amazon knows what cars I drive, it's specifically telling me these don't fit. Dave pointed out in another thread that the tabs bend and there's even a score mark so you get it straight. Bend the tabs, and these fit the original dash without any problems.

    http://www.amazon.com/gp/customer-me...images_pl_link

    I didn't think they were too hard to get in. Just a little awkward with my big hands. A trick I used to get the nuts to stay in the socket was to use some of the excess plastic the speakers were wrapped in. Just folded it over so it was 2 layers and pressed the nut into the socket with the plastic under the nut. After pulling away the excess plastic, the nut was snug and didn't want to jump out when brought near the magnet.

    The old speaker cones were completely separated at the edges. These sound a bit better to say the least.

    -Bob
    Last edited by rdarlington; 11-27-2013 at 09:09 PM.

  3. #3043
    Re-Member TEXSIX's Avatar
    Join Date:  May 2011

    Location:  Katy, Texas

    Posts:    25

    My VIN:    01393

    Broke it

    Run off the freeway at 60mph into the wall. Total loss.
    Attached Images

  4. #3044
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,432

    My VIN:    05457

    Quote Originally Posted by TEXSIX View Post
    Run off the freeway at 60mph into the wall. Total loss.
    So sorry to hear that! I hope you came out of it ok, that looks like it was a rough crash. What specifically happened? Someone not paying attention trying to turn into you?
    David Proehl

  5. #3045
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by TEXSIX View Post
    Run off the freeway at 60mph into the wall. Total loss.
    Oh, crap. Are you OK?? Looks like a rough crash, very surprised the doors stayed shut and that you're posting so soon after. Hope everyone made it out safely.

    That said, yes - very curious what happened! Was it caused by someone else on the road? Component failure of some kind?
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  6. #3046
    Motors about after dark Michael's Avatar
    Join Date:  May 2011

    Posts:    4,922

    My VIN:    Banged your VIN'S mom

    I'm sure everyone (including myself) is curious as to what happened here but I am going to assume a few things:

    A: I assume the owner is Tex and he is OK. Judging by the pic title, the accident took place 11/17. This car is also the one pictured at DMCH.

    B: I think if he was ready to share what happened he would have done so, and will do so if/when he is ready...so I will not push for answers.

    lets just wait for him to share when he feels the time is right. He may in fact be injured to some degree and unable to post much, or he may just need some more time to collect himself. In any event, lets give him a little breathing room.
    http://dmctalk.org/image.php?type=sigpic&userid=90&dateline=161808992  9

  7. #3047
    Senior Member Dangermouse's Avatar
    Join Date:  May 2011

    Location:  Atlanta OTP GA

    Posts:    7,085

    My VIN:    2743

    Club(s):   (SEDOC) (DCH) (DCUK) (DOC-UK)

    Sorry to hear/see about your accident.
    Dermot
    VIN 2743, B/A, Frame 2227, engine 2320

    I don't always drive cars, but when I do, I prefer DeLoreans

    http://www.will-to-live.org

    No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"

  8. #3048
    Member gongloo's Avatar
    Join Date:  Jul 2012

    Location:  Waltham, MA

    Posts:    42

    My VIN:    5879

    Quote Originally Posted by TEXSIX View Post
    Run off the freeway at 60mph into the wall. Total loss.
    So sorry to hear it! Thoughts and prayers with you.

  9. #3049
    Vin3299's Doc DeLorean03's Avatar
    Join Date:  May 2011

    Location:  Eglin AFB, FL

    Posts:    1,603

    My VIN:    3299

    Dang man, sorry to see it. Hope you're doing ok - both with your health and coping with the situation.
    DMCTalk.org Moderator

    Actual snippet of a conversation from Sept 2013:

    Me: Eddie, I can't wait to get the car back when you're done with it.

    Eddie: Yeah, you'll be able to give the car gas, and it won't be - like - embarrassing....

  10. #3050
    Re-Member TEXSIX's Avatar
    Join Date:  May 2011

    Location:  Katy, Texas

    Posts:    25

    My VIN:    01393

    Broke it

    You can talk about things happening fast, but you really have no idea just what fast is. For me I was in the marked exit lane on I-10 in Houston, when a woman in a "98 Honda in the next lane decided she wanted to exit also. She just jerked her car to the right, with her front tire at my nose. Two things could have happened. If I hit her, we both would have been in five lanes of on coming traffic, probably killing us both, or hit the brakes and hit the wall.
    The car hit head on into the wall, bounced off and spun hitting the rear, breaking the carrier and trailing arm, then bounced back hitting the right front and sliding down the freeway. Quite a ride. Total time, less than 30 seconds.
    The woman in the Honda took off, never stopping. My luck, another woman chased her down, took pictures of her car with her cell phone and got her license plate number. By the time she returned to give me the information, and get my email address, so she could send me the pictures, the fire dept, wrecker, and police were there. The car went to DMC, but I walked away, small cut on my leg, and some sore muscles. Picture of the running Honda, and license went to my insurance company and they, not the police tracked her down.
    Attached Images

Page 305 of 954 FirstFirst ... 205 255 295 303 304 305 306 307 315 355 405 805 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •