i got my dad locked up sitting in the drivers seat, and i couldn't get the door unlocked. We tried the door locks when the door was only halfway closed, bad action. After popping the upper door card he was quickly released.
i got my dad locked up sitting in the drivers seat, and i couldn't get the door unlocked. We tried the door locks when the door was only halfway closed, bad action. After popping the upper door card he was quickly released.
Posts: 4,862
My VIN: 3937
Had ourselves a little club get together around the pool and BBQ. 10 cars I think in total. Perfect weather as well and no snow shovels needed to be involved.
IMG_3759.jpg
Sept. 81, auto, black interior
Location: Vancouver, BC
Posts: 3,388
My VIN: thirty two 'o five
Club(s): (PNDC)
Cracked 4916's callipers. It literally looks like they were packed with mud. At least 2 pistons were seized.
![]()
Dave
Here, somewhere.
Not today, but after spending Saturday fixing my leaky drive-axles I took the car out to run her up to temperature... and had a perfect chance to test out my new microphone.
Thanks,
Lenny
DMCH New Build in 2005, Stage II, DPI Stainless Exhaust, Eibach Suspension, 170 Mph Speedometer, Xenon Lights, Wings-A-Loft, DMC Wide Angle Side Mirrors, 3rd Brake Light
For the first time since DCS I drove the car. I had to go to the dentist and figured I may as well have some pleasure out of the trip. The car started right up and had no problems. It reinforced one thing. I bought a DMC Houston A/C vent plug for the passenger side at DCS. When I first put it on at DCS I could feel a little air leaking around it. I then put a rolled up pair of socks behind it and put the plug back in. I didn't notice much difference, I left at 0400 and it was so cool driving home I didn't use the air much. Through Georgia it was cloudy and I didn't hit Florida till evening. That's a long story to say I haven't used the air much. Today was a 98 degree and Humid Day. The AC was a lot better I actually turned it down a notch. If you are not happy with your AC, plug the passenger vent. It made a world of difference in mine. I like to flow on my side of the car.
If you don't mind the rolled up pair of socks showing when you open the door don't worry about it. However if you want a nice clean look http://store.delorean.com/p-10432-ac...lugs-pair.aspx
Thanks,
Lenny
DMCH New Build in 2005, Stage II, DPI Stainless Exhaust, Eibach Suspension, 170 Mph Speedometer, Xenon Lights, Wings-A-Loft, DMC Wide Angle Side Mirrors, 3rd Brake Light
Posts: 183
My VIN: First 700
Performed my weekly drain and refill of the trans fluid. Installed the new DPNW front bat'leth brace. It is actually a very noticeable improvement for running in bumpy turns.
I decided I might as well replace my air filter housing with the new one I got at DCS. I pulled the housing off as one piece, and was glad that I did as you can see in the photos. I'm hoping some performance improvement will be felt!
Old_Air_Inside.jpgDPNW_Brace.jpgOld_Air.jpg
There should be a "oh my god what have you done to your delorean!" thread...![]()
Location: San Jose, CA
Posts: 33
My VIN: 958
Installed DMCMW's updated steering wheel with adapter, Dave's fan-fail relay, and convex mirrors from Deloreana.com. More parts coming in today from DMCH.