FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
EFI'd
Where I added the ground - I already had a good size ground wire that was running from the frame that holds the Lambda counter - to the frame of the car. I ran this wire years ago when I installed my car alarm. I forgot about this ground location - so all it took for me was a spice from the inertia switch ground wire to this location. I even had a heavy gauge wire installed there already for some reason so it took less than 30 seconds to complete this ground.
It is a shame, I think if I kept driving my D I would have much less problems, no wonder D's that sit are a mess, mine sat for almost 2 years (indoors no less!) and I'm having all kinds of issues and it was a daily driver with no problems prior.
Bill - perhaps the low pressure leads to the fuel pump breaking down... I was one of the few who - years ago - wanted to convert to a carb like you (we had many discussions about it on and off the DML), I just lacked the funds to buy a damn manifold. A ground issue is a ground issue, but I'll bet you have many less issues than us K jetters. Maybe one day.....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules