FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
EFI'd
This is crazy...so they'd rather run wires back and forth the length of the car to ground things instead of just have a main ground? If it was concerns over cost which prevented them from doing this, I don't see how it would have been cheaper to run all these lengths of wire, cut them, solder them, crimp them, cover them.... they should have just incorporated a separate line in the harnesses [which is obviously what we are doing now] which would have taken less room then dozens single black ground wires that are there now...
By the way, thanks Bill for posting, I'm sure it is taking a lot of detective work and time which you don't even need to do. This is helpful, at least to me it is. Instead of running some select grounds all over the car, I believe I may cut a few grounds (like the headlights) and just route them to the ground bus in their area. Thanks again.
Last edited by dn010; 08-24-2011 at 02:57 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules