FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 60

Thread: DeLorean Ground Schematic

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #7
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,636

    My VIN:    03572

    Yes it's just the dash volt gauge that sees that ground offset caused by the fuel pump current (and now maybe the blower current) that makes it read lower. What your doing with the large ground buss should fix it. But my plan is just to make those two large current grounds move to the frame. Then the original ground wire only has to conduct the light ground currents and hence not offset the dash gauge.

    I have already put the inertia switch ground to it's own frame ground. Now I will move the blower ground to it's own frame ground. I would do the same, run a 10 AWG wire to the shifter mount bolt. This should increase the blower motor voltage a little also.

    edit:

    Actually all the dash gauges are seeing the offset but it seems the most affected gauge is the volt gauge.
    Last edited by Bitsyncmaster; 08-25-2011 at 06:20 AM.
    Dave M vin 03572
    http://dm-eng.weebly.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •