Gotta make a few changes first:

The lambda harness connector in the car doesn't match the wiring diagram at all. The wiring diagram shows 9 pins. The connector in the car has 34 positions, but only 8 pins. Black wires in the car are also in different positions than the wiring diagram. I guess DMC made an 11th hour ECU change but never updated the wiring diagram. I have labeled my schematic "Far End" and pointed with an arrow. The two black wires are at the far end, adjacent to each other.

I have no idea what these wires do. All my K-Jet wiring is ripped out, so I can't ring them out to whatever used to be on the far end of the bulkhead connectors. To be brutally honest, I don't know for certain that they are even ground wires. They are black. They are in their own little worlds (they are not connected to chassis ground without something at the far end doing so). I have labeled their bulkhead connector positions, using Dave Delman's numbering scheme, and left it at that.

Dave has correctly identified the rear light ground, so I left that as is on the schematic.

The grounds in the Red bulkhead connector do not match either of my cars' wiring exactly: both of my cars have the neutral safety switch grounded through position 16, not position 14. Makes no operational difference of course, but it does matter how I label the other two bulkhead pins. Numbers 13 and 14 are ganged together, 16 has its own wire. I decided to simply label all three of them generically.

Latest revision:
DeLoreanGroundsFinal3.jpg
I'll eMail a full size version to Sean and see if he can't get it posted somewhere.

Remember that this is still a work in progress -- mostly finished, but still subject to change.

Bill Robertson
#5939

Just noticed that the way I drew the window switch grounds made it look like they share a large gauge wire from the junction. Redrawn to more accurately represent the actual configuration:
DeLoreanGroundsFinal4.jpg
I also changed labeling of the Lambda ECU to hopefully be less confusing.

Bill Robertson
#5939

Quote Originally Posted by Bitsyncmaster View Post
What size wire ties that bulkhead common to the frame?
6 gauge.

Bill Robertson
#5939