FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
12 gauge would be adequate. Just cut the ground wire at the switch and tie your new ground to it there. The inertia switch is *MUCH* more accessible than that junction (at least without tearing half the car apart).
Have you been melting fuse #7? If so, your pump ground is indeed likely below par.
Bill Robertson
#5939
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules