FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 480 of 954 FirstFirst ... 380 430 470 478 479 480 481 482 490 530 580 ... LastLast
Results 4,791 to 4,800 of 9533

Thread: What have you done to your DeLorean today?

  1. #4791
    Senior Member
    Join Date:  May 2011

    Location:  Las Vegas

    Posts:    787

    My VIN:    6720

    Club(s):   (AZ-D) (LVDG)

    Quote Originally Posted by DMC5180 View Post
    Yeah, that hose works great for your lawn mower. Not high pressure injection. You must ask specifically for fuel injection hose. SAE 30 R9 type

    I made sure to specify that this time, but the hose I got is not labeled SAE 30 R9.

    It says:
    Gates Fuel Injection Hose 5/16 inch (7.9mm) 225 PSI WP Barricade Greenshi...
    (Multi-fuel and Bio-fuel compatible) CARB No Q-09-019A 4219BF EPA...

    http://www.gates.com/products/indust...-225-barricade

    I figured saying fuel compatible and the PSI rating (it has braiding in between the two layers of rubber) was sufficient. Is this another problem waiting to happen with the hose I replaced it with since it does not say specifically R9?


    Last edited by jackb; 03-18-2015 at 10:15 PM.
    5 speed, grooved hood, grey interior (Nov '81)
    QA1 coilovers, Delorean.eu LCA brackets, DPNW Poly swaybar bushings, DMCMW shock tower bar, Deloreana.com convex mirrors, DPNW Toby Tabs, DPI exhaust, C4 Corvette third brake light, PJ Grady tail light boards, Bitsyncmaster relays

  2. #4792
    Senior Member OverlandMan's Avatar
    Join Date:  May 2011

    Location:  Rowlett, TX

    Posts:    1,543

    My VIN:    5482

    Put gas in it for the first time since rebuilding the fuel system. Moment of truth around the corner!
    Jeff

  3. #4793
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by jackb View Post
    I made sure to specify that this time, but the hose I got is not labeled SAE 30 R9.

    It says:
    Gates Fuel Injection Hose 5/16 inch (7.9mm) 225 PSI WP Barricade Greenshi...
    (Multi-fuel and Bio-fuel compatible) CARB No Q-09-019A 4219BF EPA...

    http://www.gates.com/products/indust...-225-barricade

    I figured saying fuel compatible and the PSI rating (it has braiding in between the two layers of rubber) was sufficient. Is this another problem waiting to happen with the hose I replaced it with since it does not say specifically R9?


    Based on the specs on the gates site it should do the job for you.

    This is the info for the R9 hose

    http://www.gates.com/oreilly/tech_ti...elLineHose.pdf
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  4. #4794
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,609

    My VIN:    03572

    Quote Originally Posted by DMC5180 View Post
    Based on the specs on the gates site it should do the job for you.

    This is the info for the R9 hose

    http://www.gates.com/oreilly/tech_ti...elLineHose.pdf
    I think the main point with fuel hose is the stated WP (working pressure). I did see some info that R6 hose had a burst pressure of 175 PSI which would make you think it's fine for us but Jack found otherwise.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  5. #4795
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    Quote Originally Posted by OverlandMan View Post
    Put gas in it for the first time since rebuilding the fuel system. Moment of truth around the corner!
    Good luck!!!!



    Sept. 81, auto, black interior

  6. #4796
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Put the sun shade up.
    3.0L, automatic, carbureted

  7. #4797
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Pushed it back in the garage.
    3.0L, automatic, carbureted

  8. #4798
    Mostly Harmless... refugeefromcalif's Avatar
    Join Date:  Aug 2012

    Location:  Duncanville, Alabama USA

    Posts:    825

    My VIN:    6599

    I drove mine to the store. (I needed toilet paper)...
    It's now back under cover due to the rain coming in, again!

    George
    George.



    1974 BMW RS90 motorcycle
    1981 DeLorean. Cruise Control, Wings-A-Loft, Eibach springs, Spax shocks, Stage1 exhaust, Manual, Grey and Grooved, LED clock and fixed pulls.
    1993 del Sol S (With a Few, Upgrades)
    2017 Chrysler Pacifica Limited

  9. #4799
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    Quote Originally Posted by refugeefromcalif View Post
    I drove mine to the store. (I needed toilet paper)...
    It's now back under cover due to the rain coming in, again!

    George
    That could make for a real "badday" (sic)...


    Sept. 81, auto, black interior

  10. #4800
    Senior Member Lenny's Avatar
    Join Date:  May 2011

    Posts:    705

    My VIN:    6654

    Club(s):   (DCF)

    I picked my car up today from DMC FL at the open house. It was the first time I've driven it since November. It looks like I'll have a car at Celebration. I need to put some Freon in it the air was a little warm.
    Thanks,
    Lenny

    DMCH New Build in 2005, Stage II, DPI Stainless Exhaust, Eibach Suspension, 170 Mph Speedometer, Xenon Lights, Wings-A-Loft, DMC Wide Angle Side Mirrors, 3rd Brake Light

Page 480 of 954 FirstFirst ... 380 430 470 478 479 480 481 482 490 530 580 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •