FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
It's still nice to crimp the terminal so it holds things while you solder. Not to bad if you only have one wire in the terminal but with many wires crimp it with anything.
When I made a new ground cable for my front bank of relays, I had eight 16 AWG grounds and one 16 AWG going to the junction. For that I just cut the ring off a 6 AWG terminal and could crimp all those wires together. Then is was soldered and shrink tubed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules