FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member

Originally Posted by
content22207
Word of caution: the cable will keep wicking solder as long as you feed it in. Don't get carried away or you will end up with a solid core cable (that is even less flexible than solid copper) rather than a stranded one.
Bill Robertson
#5939
Agreed.
Also I don't recommend soldering with the flat relay socket terminals. Unless your real careful you will get solder flowing pas the bottom part of the terminal and then your relays will not seat fully. You can test this by sticking a new terminal and a soldered terminal onto a relay and see how far they seat. You may be able to do it with brass but not with tin plated terminals. Been there done it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules