I took this:
...and made this:
...to mount here:
Now I just need to wire it. This will save me from removing my parcel shelf to adjust the sub level.
Location: Maple Grove, MN (Minneapolis)
Posts: 1,432
My VIN: 05457
I took this:
...and made this:
...to mount here:
Now I just need to wire it. This will save me from removing my parcel shelf to adjust the sub level.
David Proehl
Location: Kitchener, Ontario
Posts: 521
My VIN: 3462
Club(s): (DOI)
After owning a set of Tobys fans for about three years, I finally finished installing them. Man they Blow!
Location: Burnaby, BC
Posts: 466
Club(s): (PNDC)
That looks pretty cool. Great idea!Originally Posted by JohnZ
- Adjusted / aimed my headlights (oddly he said that they were heavily aiming downward)
- Completed my parcel shelf refurb / grille thing!
Attachment 33670Attachment 33671Attachment 33672
- Volker Seidel -
The way I see it, if you're gonna drive around in a car, why not do it with some style?
Location: Pittsburgh, PA
Posts: 133
My VIN: 3610
Oil change and replaced oil filter.
Wiped down the body with stainless polish.
Any suggestions for cleaning the engine bay without damaging the fiberglass? No pressure washing.
Location: Lebanon, Tennessee
Posts: 391
My VIN: 3294
Finally found a local source here in town for SEM Trim Black. Last night I got all of the wiring harness removed, engine covered, and rear deck masked off. Plan on painting the engine bay this weekend if the weather holds out.
DSCF8043.jpg
Barry Floyd
Lebanon, Tennessee
VIN 3294 - Aug. 81
Location: Hudsonville, Mi
Posts: 72
My VIN: 5090
Took apart my blower motor and cleaned and greased it. Ah blissfully silent now, and I actually think it pushes more air!
Location: Wellington New Zealand
Posts: 232
My VIN: 3472 (former), 1141
Club(s): (RMDG) (SEDOC) (DCUK)
Bought some parts for the car (the excuse), and visited Tony and the team at DeLorean Motor Company Florida....and paid homage to Proto 1 (the real reason for the visit) with my daughter:
DMC-F 1.jpg
DMC-F 2.jpg
Michael Babb
Location: Syracuse, NY area
Posts: 1,059
My VIN: 10287
Club(s): (DMA)
Installed my repaired governor computer, refilled the transmission. Success!! Shifts up and down smoothly. Thanks to DMCMW and DPI for their silicone pan gasket.
One weird little drama did happen though, the car didn't start in Park the first time I tried it. Just made a clicking noise from the relay compartment, no starter turning. I was ready to throw a fit, calmed down enough to think and moved the shifter to Neutral and bam! it started right up. I drove the car a few miles to test the governor and started the car several times more and it starts perfectly normally in Park. BizarreI'll just chalk it up to DeLoreanitis
Nick A.
1988 BMW 325is
1982 DeLorean DMC-12
1989 Jaguar XJ6
Location: Sacramento, CA
Posts: 637
My VIN: 2567 (Sold)
Nicely done!!
I took this:
...and made this:
...to mount here:
Now I just need to wire it. This will save me from removing my parcel shelf to adjust the sub level.
Location: New Brunswick, Canada
Posts: 257
My VIN: 4266, Previously 11056
JohnZ, that is an awesome idea. I was trying to figure something else out that involved a PC fan and vent, but that seems way simpler and I like the look of it a lot better. Kudos to you.- Completed my parcel shelf refurb / grille thing!
Posting Permissions
Reply With Quote
