What have you done to your DeLorean today?

[DMC-81]

Attachment 36484

Nice work!

[Shuttleman]

Thanks, I will show that comment to my wife. When she saw my frame the only thing she said was: "This will be hidden under the car?!"

[Domi]

Amazing job done on the frame, it's beautiful!
Congratulation

[DMC-81]

Cleaned the right rear suspension area, and re-painted the upper control link (and spring cups). I found "O.K." markings in red marker on both hub carriers, so I darkened them a little. Now I'm ready to install new suspension parts....

image.jpg

image.jpg

[SKnight]

Had DMCNW install the Eibach suspension kit. Also added a stainless shift plate and a (fake) Momo steering wheel.

WP_20150905_003.jpg WP_20150905_004.jpg WP_20150905_002.jpg

[OZ DMC]

Had DMCNW install the Eibach suspension kit. Also added a stainless shift plate and a (fake) Momo steering wheel.

WP_20150905_003.jpg WP_20150905_004.jpg WP_20150905_002.jpg

HI SKnight,

Was it much of an issue installing the Momo wheel and where did you get the DMC name badge for the centre?

[DMC5180]

HI SKnight,

Was it much of an issue installing the Momo wheel and where did you get the DMC name badge for the centre?

DMCMW makes the logo plate and also sells the wheel and adapter as a kit. It's a fairly easy install as long as you have the correct hardware to use with a steering wheel puller. You can usually rent those at an auto parts store if you don't what to by one. The bolts you need for the puller are M6 x 1.00 x 100 mm Long and a couple appropriate sized washers under the bolt heads.

[Alan]

This was actually yesterday. I'm going to appall some of you, I'm sure.

Colleen and I went to dinner and I left 1121 with a valet. It worked out great. She was put in "exotic row" with a Maserati and a number of nice Porsches. She was in the corner so it was only the Maserati right next to her.

This was at a nice place with respectful valets. No, I wouldn't do it just anywhere but I would do it again.

[SKnight]

HI SKnight,

Was it much of an issue installing the Momo wheel and where did you get the DMC name badge for the centre?

I ended up having DMCNW put the wheel on since I already had the car there for other work. There are a few threads out there that discuss how to remove the old wheel and put on the new. Like DMC5180 said, DMCMW makes the logo plate and packages it together with the wheel and adapter, but you can buy them through any of the DMC franchises.

[Domi]

Had DMCNW install the Eibach suspension kit. Also added a stainless shift plate and a (fake) Momo steering wheel.

WP_20150905_003.jpg WP_20150905_004.jpg WP_20150905_002.jpg

CB Radio in front of the passenger seat?