FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 29

Thread: Fuel Pump Change- What do I need?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #3
    Quietly enjoying ownership Cory W's Avatar
    Join Date:  May 2011

    Location:  North Bay, Ontario, Canada

    Posts:    481

    My VIN:    4692

    The pickup hose is included in the kit. Really everything from the pickup screen right to the hoses connected to the hard lines leading to/from the rear are included. The aftermarket pump looks a little different but works fine. You need to reuse the banjo body (ring with barb you connect the hose to at the top of the pump) from your old pump, but its easy to swap and put in place. A pair of channel lock pliers are handy to hold the pump while tightening the dome nut at top of the new pump.

    If you're not sure it's ever been done, it's a good idea to remove the baffle and clean the inside of the tank while you're in there. It can be done with the tank in the car, leaning over a fender, but you may even climb into the cargo area to reach all the way in. Take pictures inside the tank while you do it to see if you've reached back far enough, as well as to get a look at the tank.

    you should also take a pic of the baffle assembly to see how it goes together before removing. (You need a 10mm socket to remove the nut and washers from the bottom of the tank. Do not overtighten when reinstalling)

    The baffle needs to be disassembled in the tank to remove. You will need to squeeze the round baffle body and gently fold the circular base to get them out. There are also two metal clamps that help hold the pickup screen in place and hold down the baffle body. Check pictures below.

    When you're putting everything back in place, make sure it's all lined up, and you won't need to rotate the pump when reinstalling everything. You don't want to kink the hose while making sure the feed and return hose clear the access panel.


    How is your fuel gauge sender working? I recently cleaned my original one, and it works better than it ever has before. I sprayed carb cleaner into it and shook it around a lot. Let it drain out, put it back in place and filled the tank.
    Attached Images
    Last edited by Cory W; 09-05-2011 at 12:05 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •