FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Quietly enjoying ownership
Just some rags/paper towel and some solvent, yes. You should also have a spray can of carb cleaner to deal with any left over solvent. You'll know you're done when the rags/towels start coming out of the tank clean. Make sure you have everything you need so you can do it all in one shot. It's not the most fun thing you can do on these cars.
I've seen a thread somewhere before talking about how the new DMCH fuel senders don't read quite right. There are two small holes on the bottom of the unit. One hole already has a small metal screw in it. Apparently the accuracy of the sender improves if you get another small metal screw for the second hole. Screw it all the way in to get full threads, but leave it only partially screwed in; you still want to let fuel in/out. I did this to a car I've been working on, and it seems to improve its accuracy.
The new pump still has its check valve on the pump, but it's not built-in anymore. It's removable, and therefore replaceable if you can source one. (That's why the kit includes a dome nut. You'll reuse the banjo body, but not the banjo bolt off the old pump.)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules