Console switches don't align? Voila! Problem solved!

[DMCMW Dave]

I purchased the lighted switches from DMC, but have not installed them yet (although I need to, my switches are flakey).

One of the issues I've heard with the lighted switches is that they are slightly taller than the OEM ones, and if you have any console deflection, they won't stay seated, or they bottom out.

Anyone know if this extra bit of metal spacing corrects that?

TIA,

Doogie

It help as it does lift the switches slightly. BUT

Another thing that will help is to support the console from underneath. When "new" they fit OK, but after 30 years of elbows leaning on the console, and people climbing over the console to unjam the opposite door, the console is lower than it should be. I've found that a 2x2x1" wood block placed between the console and the fiberglass, just forward of the ashtray will do wonders for the fit of the switches. Originals or replacements.

[PJ Grady Inc.]

I purposely made the bottom portion thicker than needed for the stock switch's to completely eliminate this problem with the DMCH switch's. It locks all of the switch's in place but also keeps you from accidentally engaging them with your arm or elbow. I spent a lot of time, as many here know, perfecting the design, dimensions, and materials to work with all available switch's. One minor exception is that the current reproduction defroster switch is thicker than NOS so it has to be shaved down for a few seconds on a grinding stone to fit. I didn't want to compromise the fit of the originals to allow for a design flaw on a seldom seen reproduction part. Of course you could just stuff a block of wood under your console as another suggests but you won't be getting the same benefits.
Rob

I purchased the lighted switches from DMC, but have not installed them yet (although I need to, my switches are flakey).

One of the issues I've heard with the lighted switches is that they are slightly taller than the OEM ones, and if you have any console deflection, they won't stay seated, or they bottom out.

Anyone know if this extra bit of metal spacing corrects that?

TIA,

Doogie

[PJ Grady Inc.]

You should try one of these Mattaligner's Dave. You just might like it!
Rob

It help as it does lift the switches slightly. BUT

Another thing that will help is to support the console from underneath. When "new" they fit OK, but after 30 years of elbows leaning on the console, and people climbing over the console to unjam the opposite door, the console is lower than it should be. I've found that a 2x2x1" wood block placed between the console and the fiberglass, just forward of the ashtray will do wonders for the fit of the switches. Originals or replacements.

[DMC5180]

The mattaliner is a great idea.

For me I did the block of wood method. I like the fact that it creates a supported surface to lean on. My switches are perfectly straight across.

On side note: my defroster switch fell apart a couple years ago. I reassembled it per instructions that Rob G. handed out at a DCS tech session several years ago.
I inadvertently installed the outer switch housing 180 degrees opposite. When I installed the switch in the armrest I discovered the switched rocked forward to turn ON.
The silver lining is that the OFF position is straight across level and it's impossible to accidentally lean against the switch inadvertently turning it ON. Call it dumb luck, but I like it this way.


Dennis

[DMCMW Dave]

You should try one of these Mattaligner's Dave. You just might like it!
Rob

I have the second prototype on my car.

[PJ Grady Inc.]

I have the second prototype on my car.

Ok but not with the armrest pad, revised dimensions, and the mounting screw provision which makes a big difference in overall quality. Just ask Matt in a week or so. He waited for the black version which we are shipping out to him today.
Rob

[DMC-81]

Alright guys, the Mattaligner has arrived! I've installed it and couldn't be happier!! I ordered the black one. It came with both grey and black bumpers, a drill bit and (2) mounting screws. I have included pics of both installed, but prefer the black. For all those wondering, you can't even see the text printed on it when installed. With the black bumper this piece looks very stock.

This product was definitely worth the wait!

Thanks Rob!!

Hmm.. Very nice!

It help as it does lift the switches slightly. BUT

Another thing that will help is to support the console from underneath. When "new" they fit OK, but after 30 years of elbows leaning on the console, and people climbing over the console to unjam the opposite door, the console is lower than it should be. I've found that a 2x2x1" wood block placed between the console and the fiberglass, just forward of the ashtray will do wonders for the fit of the switches. Originals or replacements.

I also bookmarked this tip for when I get to the interior as I'm a leaner.

[John U]

Anyone have a link to where to order from?
Thanks
John

[PJ Grady Inc.]

Anyone have a link to where to order from?
Thanks
John

We recently replaced our computers and enlarged/changed servers and had teething problems which are just now hopefully behind us. I will get them up on our site but in the meantime you can call (800)350-7429 to order or supply all pertinent info to our "Contact us" portion of the website and state whether you want grained stainless or black stainless and we'll contact you for credit card or pay pal info. Otherwise if it can wait till next week we should have them on the site by then.
Rob Grady

[Timebender]

We recently replaced our computers and enlarged/changed servers and had teething problems which are just now hopefully behind us. I will get them up on our site but in the meantime you can call (800)350-7429 to order or supply all pertinent info to our "Contact us" portion of the website and state whether you want grained stainless or black stainless and we'll contact you for credit card or pay pal info. Otherwise if it can wait till next week we should have them on the site by then.
Rob Grady

I noticed they're not on the site yet. How much are these?