Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
3.0L, automatic, carbureted
Posts: 1,068
Buy a $3.99 assortment of vacuum plugs instead. They will do everything you need until this idle situation is sorted out.
You won't need any of the 1/4" plugs -- stick them on your courtesy light door plungers.
Bill Robertson
#5939
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Fortunately, I've done that already. I get even, regular flashes on each wire right above the plug.
I will try blocking off all of the vacuum ports next. I actually thought of doing that last night while chewing the matter over with a bandmate of mine* at a photo-shoot, but I was busy (as I was tonight, and will be tomorrow night).
If I decide like punishing myself, or can bathe in DEET, or get someone to hold an umbrella over me while I work, or all three, I might try the vacuum cap method this weekend.
Farrar
--
*Interesting fellow -- he told me of a '72 Buick he once had which had developed a crack in the carburetor so small that he couldn't see it. Symptoms: every time it rained, the car would die, but when it dried up again, the car would start and run fine again -- until, of course, the next time it rained. He told me he eventually covered the entire thing in JB Weld. (The carburetor was craptastic, anyway.)
3.0L, automatic, carbureted
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Yep. But I noticed the plugs on the left were really dark, so I replaced them all and re-adjusted the idle air mixture screws so that the fuel flow would be balanced side-to-side.
Edit: FWIW, they're plain old Autolite 103 plugs; nothing special about them. I gapped them at .044"
Farrar
3.0L, automatic, carbureted
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Did you ever figure out why there was coolant in the air filter housing? I can do a combustion test for you next time we are around each other. If you have a head gasket leak, that could be the very reason you are having idle problems.
When I had my head gasket leak I had to run a higher octane gas otherwise the engine would knock.
EDIT: Were any of your plugs wet?
Location: Dahlonega GA
Posts: 2,462
Club(s): (SEDOC) (DCUK)
eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
K-Jet: Causing electrical issues since November 5th 1955
Posts: 1,068
Multi electrode plugs can't be regapped.
It's not as though you get 4 sparks with 4 electrodes. As soon as spark jumps one of the electrodes, that's it -- you won't get any others.
The reason you may be having better success with them is because they come gapped very small, which is right up Bosch ignition's alley (Bosch coils can not jump common breakerless plug gaps -- they are limited to small plug gaps).
Bill Robertson
#5939