For really weird ways of using a vacuum gauge, how about the way my grandfather used to time the spark on his Willys? Short out every other plug, set idle to 1500 RPM, then adjust distributor to the highest vacuum reading. I'll bet the gang at Jiffy Lube don't know that trick.

Anyway...

I drove Spark to and from a video shoot tonight. Despite the fact that the engine idles like crap, I was able to start, stop, and drive the vehicle successfully. Unfortunately, something has happened to the courtesy light circuit: the car "thinks" that my door is open all the time now. I had to pull the fuse to turn the lights off so that I could drive home safely. After that, I noticed that the dome light fixture has broken, so I removed it.

A thought occurred to me as I was driving home tonight: most of the problems with our cars are electrical, right? So what if something has happened which prevents the spark from jumping a .044" gap? I will re-gap the spark plugs to something smaller -- say .035" -- and see if it improves the running of the engine.

Also, tonight was the first time when I drove the car at night after I converted the headlights to H4 bulbs. Even though the housings don't look stock, I REALLY like the H4 bulbs and plan to keep them.

Farrar