Quote Originally Posted by dmcnc View Post
What are you thinking for slosh reduction? My tank slosh usually acts up when less then a 1/4 tank.

I will put a long software timing to average the sensor readings. I may think of some ways to average that work better. When you first turn the car on it will quickly show what the sensor reads and then start averaging. So if your car is parked flat you should get an accurate reading right away. Maybe I can adjust the averaging since if the car is not shut off the reading should not increase (unless you fill the tank with engine running).

Another thought is where to get 12 volt power for the unit. If you take power from the fuel pump the unit would only work with the engine running. If you mounted the unit under the dash you could get power easy, not sure if you mount it over the tank.