Quote Originally Posted by jangell View Post
Base Idle Screw: ok. I had been planning to let the IAC completely control idle, and just close the throttle all the way, but it seems that I need to crack the throttle to get the idle up above 650.
You can also set the IAC minimum steps, but then you might cheat yourself out of the max ability of the IAC to control RPM under all conditions.

Quote Originally Posted by jangell View Post
Spark table: that’s almost completely auto-generated. I have no idea how to adjust it at all. The only cells I changed are a 2x3 block around my idle, which I set to 14.
https://www.youtube.com/watch?v=CiqrSJIITGY

Quote Originally Posted by jangell View Post
I’m good with adding more low RPM columns. I’m just not really sure how important the high ROM columns are or what values I need in those columns when I reassign. Since you noted that I have duplicate columns, can I safely just reassign the the lower columns fornidle ranges, and just interpolate the higher columns?
Exactly! The above video shows how to rescale with interpolate, which will help you shift everything over and make room for some fine-tuning in the idle ranges.