Thanks -- I'll check that tomorrow. I'm trying to get it so that the IAC steps are close to 0 when warmed up, which would mean that the IAC is completely closed and that the lowest RPM at idle is held by the throttle screw alone. But it seemed like it only needed a very slight turn to do that -- I think a half turn, but I don't recall exactly.

I did notice that once the engine was in gear, it dropped to the 650-700 range -- I only just remembered that because I spent most of my time tinkering with the car in Park. Maybe I should target closer to 850-900 for an idle, and keep the idle screw a bit more open, then see if it drops back to 790 or so when in gear. I'll have to check again tomorrow and see what it's doing, as it's likely I'm remembering this all wrong right now.

-- Joe