FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
I keep forgetting that TPS is used in places like that. That would explain a lot.
I went to the junkyard and got a TPS off of an actual Mustang, and of course it doesn’t fit (slightly different mating size for the barrel, slightly different screw hole spacing). I should have trusted that’s Josh had the right TPS in the first place. I put the old TPS back in with a much thicker O-ring, and it seems to be working OK for the moment. We’ll see if that lasts.
I was still getting the idle dropping to the 650 range until I changed Use Last Value it Table to Table and configured a basic table. Now it soft lands around 790 RPM like I want it to.
I think I have the decel and idle sorted well enough for now. Next is to figure out why it wants to stall when I open up the throttle even a little quickly. Probably time to play with accel enrichment and the VE table, or something.
Thanks!
— Joe
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules