FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 27

Thread: High idle on cold start: vacuum leak or IAC setup?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #26
    Senior Member
    Join Date:  May 2011

    Location:  Southern MA

    Posts:    975

    My VIN:    767 (3.0L EFI/EDIS)

    Will do — thanks. I’m using a clean, untuned VE, so I need to get to auto-tuning as well.

    I drove around the block. Got a few stalls on acceleration, as expected. The idle also dropped to >650, because apparently the TPS got stuck again (this time at 5.5%). <sigh> Guess I’ll tinker with that for a bit, but I’m getting closer to just unplugging it and switching everything to MAP.

    — Joe
    Last edited by jangell; 12-30-2018 at 04:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •