What are some off the shelf available brackets that you all have found to hold the flux "mesh" steady to the rods while driving? Home Depot/Grainger/Lowe's sources or a preferred direct link please? Thanks! I've seen some brackets (P clamps") with black rubber on the metal and of course, the original car with just pure metal?
So you could just buy some hose clamps at depot, but if you want to be accurate the screen used ones are gold with a slit in it. You can get the exact ones used here:
they also have the purple #13 size ones used on the exterior cables that go to the flux boxes, various inside cabling, and the on the bottom of the SID. they are really expensive though. I did some research and found these for the the purple cushion #13's:
they are purple with a gold band with no slit but a fraction of the cost. the flux band clamps are a size 10 but the closest they have there is a 9. you could just toss the rubber isolator for the gold band. (in the picture below the purple looks darker than it really is, its actually a nice close match to the film color)
Originally Posted by StanMan PushN 88
Reply With Quote