FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 5 of 22 FirstFirst ... 3 4 5 6 7 15 ... LastLast
Results 41 to 50 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #41
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,395

    My VIN:    5003 Never placed Concourse 2002-Current

    Club(s):   (DCF)

    Quote Originally Posted by Nicholas R View Post
    What about this? Is it the same project?

    http://www.az-d.org/indiglo.html




    That kit is something that AZ-D offers-apparently for some time now, which is why I didn't understand the hype over this post....
    Last edited by dn010; 09-13-2011 at 05:30 PM.

  2. #42
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,432

    My VIN:    05457

    Quote Originally Posted by dn010 View Post
    That kit is something that AZ-D offers-apparently for some time now, which is why I didn't understand the hype over this post....
    I think the excitement is around an entirely new cluster. What Jim is working on isn't just an overlay, he is working on modernized gauges that you can actually trust in addition to the back lighting.
    David Proehl

  3. #43
    Senior Member robvanderveer's Avatar
    Join Date:  May 2011

    Location:  Netherlands

    Posts:    612

    My VIN:    3695

    Club(s):   (DCN)

    Quote Originally Posted by Nicholas R View Post
    What about this? Is it the same project?

    http://www.az-d.org/indiglo.html


    I have that very same speedhut kit installed in my D, but I never managed to get a picture like that! Buyers beware..

  4. #44
    Slickness of SS SIMid's Avatar
    Join Date:  May 2011

    Location:  Melbourne, Australia

    Posts:    1,380

    My VIN:    01955

    Jus tto throw a spanner in the conversation, has anyone thought of ultraviolet light? Will it light up the white graphics on the cluster?

    Just an idea.

    But I do like what Nicholas posted up, looks great!

  5. #45
    LS1 DMC Nicholas R's Avatar
    Join Date:  Jun 2011

    Location:  Orlando, Florida

    Posts:    2,734

    My VIN:    01643

    Club(s):   (DCF) (DCO) (DCUK)

    Quote Originally Posted by SIMid View Post
    Jus tto throw a spanner in the conversation, has anyone thought of ultraviolet light? Will it light up the white graphics on the cluster?

    Just an idea.

    But I do like what Nicholas posted up, looks great!
    You know I've never thought about that but it would be kind of neat. Heck the gauges are already white; I'll bet even just a thin uv light bar or strip would make it pop. Hmmm...

    Also it looks to me like the illuminated gauges I just posted are just decals that have all the numbers clear with electroluminescent strips behind it. Could be mistaken though...

  6. #46
    Slickness of SS SIMid's Avatar
    Join Date:  May 2011

    Location:  Melbourne, Australia

    Posts:    1,380

    My VIN:    01955

    Quote Originally Posted by Nicholas R View Post
    You know I've never thought about that but it would be kind of neat. Heck the gauges are already white; I'll bet even just a thin uv light bar or strip would make it pop. Hmmm......
    When running the unltraviolet light, you really dont see any light at all. Plus you could just get new graphics printed with luminous colours and they would glow at night. Just thoughts messing around in my head.

  7. #47
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    The SpeedHut EL decals are most definitely NOT the same. Those decals are rather lackluster in person. They do not even closely match the typeface of the original cluster, are very monotone at night, bleed light through their edges, and don't solve the problem on non-backlit needles. Not to mention your still running a completely original cluster with all of it's disadvantages.

    UV illumination is something I've tried as well. The red and yellow light up very nicely, but that is it. The white lettering, blue lettering, and the needles are all as dark as could be under UV light.

    I havent had much to update about this lately, but I hope to within the next week or so have a full breakdown about the entire stock cluster, it's specific weaknesses, and what will specifically be improved upon with the new one.
    Jim Reeve
    DMC6960

  8. #48
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Thread bump! Any news?

    Farrar
    3.0L, automatic, carbureted

  9. #49
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    As with everything anybody does life slows you down.

    What I do have...

    Limited working software to drive the stepper motors for the needles. Still needs lots of refinement though and I'm trying to obtain specific driver IC chips for them which will make them work much nicer. Minimum order requirements: 100/pcs @ $6.50/each. That fine for producing 50 dashes, but not so fine for prototyping to see how well it would work.

    Also have a lead on a plastics manufacturing company which has done low volume production for reasonable rates. Conveniently they are only 2 miles from my home so working with them should be easy (keyword: should).

    I had also brought my spare cluster and the sample backlit decals to the Minnesota Fall Apple Orchard gathering to show how the design is currently working out.

    Also now that I finally found the battery for my good camera I can get some high-res photos of the sample decals and more details about the stock cluster and writeup some more info on what is changing.

    Stay Tuned....
    Jim Reeve
    DMC6960

  10. #50
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Cool beans, Jim! I just wanted to make sure you hadn't given up on the project. :-)

    Farrar
    3.0L, automatic, carbureted

Page 5 of 22 FirstFirst ... 3 4 5 6 7 15 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •