I updated the blower fan circuit breaker to 30amp....I had experienced an intermittent problem with the blower motor turning on and off after warming up(it acted as though it would get warm, shut off, then after cooling, it started back up and continued the cycle)...I didn't get to test it more than with the engine off just to make sure it worked after the upgrade...I also checked the connections at the blower motor itself...

I found the main and auxilary relays under the door lock module that have metal casings...do these rarely go bad? Any need to upgrade or change them to plastic housings?

I looked at the lambda relay and have a replacement relay ready to go...just contemplating my plan of action since it is a very tight area to work in and the wiring is also very tight. Dave Bit, what is the easiest way to move the wiring for the lambda relay socket mod?

Also Dave Bit, I plan to get your updated RPM relay and interior lamp delay relay in the future...Thanks for the help!

Josh Q