As it happens, when I pulled the flasher unit that I bought at AutoZone a few years ago, I saw that it already had "LED" stamped on it. So I put in my LEDs and here's the result:
The 1156 and 1157 amber bulbs have been replaced with forward-facing two-watt units from SuperBrightLEDs.com. The side marker lights were replaced with small BA9s which have six side-facing LEDs. I put the short (1 LED) sides facing up and down and the long (2 LED) side facing front and back. The part number for the amber unit is BA9s-AHP6, and the part number for the red unit is BA9s-RHP6. Since the blinker mod for the front side lights switches ground and these bulbs are not polarity-sensitive, they will still blink with the hazard switch or turn signal switch engaged just like they did when they were incandescent.
Also: Just for fun, I have dubbed my courtesy light modification the "Stealth Mode Mod" -- here's a look.
If I am lucky it will make me invisible to moths...
Farrar




Reply With Quote
