I put the new "Soft Lift" struts on the car today when it was about 60°F outside and noticed that the very slight resistance toward the top of the lift piston's travel causes the doors to stop moving upward completely, requiring me to push the doors the rest of the way open with my hand. Considering that these are brand-new pistons and it's only mildly cool outside, I'd say it's time to up the torsion bars' tension on both doors up one notch. That should allow my doors to open all the way when it is actually cold outside, and in the summer the "Soft Lift" struts should prevent the doors from bouncing at the top of their travel.

Farrar

P.S.: I can NOT, for the life of me, figure out how I am supposed to get the little clip on the bottom of the passenger-side strut. There simply isn't enough room to get the clip in there without bending it, at least not using my fingers. Why hasn't anyone come up with a strut mounting ball [I dunno what the official term is] in a mirror image of that which the driver's side uses? That is friggin' annoying. Oh, well...