FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 10 of 22 FirstFirst ... 8 9 10 11 12 20 ... LastLast
Results 91 to 100 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #91
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Digital Odometer

    So my 7-segment LED samples came in today. These units have 7.6mm (.30") high characters. This slightly exceeds the actual vertical opening of the stock odometer cutout. Unfortunately the width of the units lined up together more than slightly exceed the odometer opening, by 8mm. These units are some of the narrowest I can find. Most of the 7mm and 5mm 7-segment displays I've found actually are slightly wider. Unfortunately, nothing beneficial is gained from 2 or 3-digit units either. I have found one manufacturer of a 5mm unit which is only 6.9mm in width. This would put the total width at 41.4mm, still exceeding the stock 36mm but slightly better than the 44mm I have now. Another concern about the small size of these are the ability to solder them. The super small units are all surface-mount devices with incredibly small contacts. Designed for "reflow" soldering on a manufacturing line. Not hand soldering in someone's workshop. While browsing many of the manufacturer's websites, a lot of them advertised "ask us about custom units, at affordable prices". So I'll throw a few feelers out there for a single 6-digit unit which perhaps can be made a little more compact than individual units. We'll see. Once I have the vector graphics completed for the speedometer I may also play around with slightly enlarging the scale to make the units I currently have fit with an OEM look. If this looks OK, I'll enlarge every gauge, print out some quickie samples, and lay them over my spare cluster. So I have several options to pursue here.

    Here are the photos of the 7-Segment lineup...
    photo 3.jpgphoto 1.jpgphoto 2.jpg
    Jim Reeve
    DMC6960

  2. #92
    Cock Monger thirdmanj's Avatar
    Join Date:  May 2011

    Posts:    2,517

    I'm just geeking out over the progress you're making! I follow this thread with keen anticipation and find it most educational too! I'm most certainly interested in purchasing the final product!

  3. #93
    Senior Member ramblinmike's Avatar
    Join Date:  May 2011

    Location:  Alton, IL

    Posts:    302

    My VIN:    00910

    Yeah, it's dirty. I drive it.

  4. #94
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dmc6960 View Post
    I have found one manufacturer of a 5mm unit which is only 6.9mm in width. This would put the total width at 41.4mm,
    Quote Originally Posted by ramblinmike View Post
    Would this one do the trick?
    That one seems to be 41.4mm as well.

    Farrar
    3.0L, automatic, carbureted

  5. #95
    Senior Member ramblinmike's Avatar
    Join Date:  May 2011

    Location:  Alton, IL

    Posts:    302

    My VIN:    00910

    Quote Originally Posted by Farrar View Post
    That one seems to be 41.4mm as well.

    Farrar
    I was focusing on the ones he had in the picture. Oops!
    Yeah, it's dirty. I drive it.

  6. #96
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Making the perfect "0"

    It seems one of the more difficult things people have faced when trying to make replica speedometers, is an inability to match the typeface of the originals. I myself do not know the actual typeface. I've done automated font searches using high resolution images of the typeface, and have come close, but they are licensed fonts which would be at least $30 for a personal copy, but legally would require much more if used in a sold product. So the next best thing, make new ones from scratch. Using a digital micrometer and high resolution "eyeballing", I've taken measurements of the dimensions, including width, height, and curve radii.

    Here is the first (and easiest) character, the Zero, and its measurements...

    0.jpg0measure.jpg

    The original file is in a vector format with infinitely small border lines. So it can be scaled perfectly when used in different manners in the whole cluster.
    Last edited by dmc6960; 01-10-2012 at 01:56 AM.
    Jim Reeve
    DMC6960

  7. #97
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    awesome. i love how thorough you are being with this! i cant wait to get one... the only prerequisite is i need a D first.

    actually, when you start selling them, ill probably get one even if i dont have a D just to be sure i get one...
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  8. #98
    Senior Member 1batt4u's Avatar
    Join Date:  May 2011

    Location:  Queens, NY

    Posts:    1,307

    My VIN:    2964

    Are you gonna have different speedo gauge set up, 85mph, 140mph or 160mph, or even a 95mph for BTTF??
    Billy C. VIN: 2964

    "Trying to Live the Dream!"

    "If you're gonna own a DeLorean, why not build it with some style?"

    http://www.facebook.com/billy.chingas.7

  9. #99
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by 1batt4u View Post
    Are you gonna have different speedo gauge set up, 85mph, 140mph or 160mph, or even a 95mph for BTTF??
    Plans are for 85mph, 140mph, and 240km/hr.
    Jim Reeve
    DMC6960

  10. #100
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Jim, how's the fontifying going? Might the font eventually be available for download? I have a few projects I can think of where it would come in quite handy.....
    3.0L, automatic, carbureted

Page 10 of 22 FirstFirst ... 8 9 10 11 12 20 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •