FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 11 of 22 FirstFirst ... 9 10 11 12 13 21 ... LastLast
Results 101 to 110 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #101
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Well I'm not making a whole "font" per se, just the perfectly scaled vectors for every character used in the cluster. I have completed several other numbers but when I did the 8 everything looked way off, despite using the measured dimensions. It appears the 8 uses different radii on its curves. I've taken some higher resolution scans and am currently reevaluating all of the demensions I've done so far. The vectors could be made available per request.
    Jim Reeve
    DMC6960

  2. #102
    Senior Member knightjp's Avatar
    Join Date:  Nov 2011

    Posts:    187

    Quote Originally Posted by Nicholas R View Post
    What about this? Is it the same project?

    http://www.az-d.org/indiglo.html


    This is definitely an excellent thing to do for the interior. I know the Delorean's interior can seem dated. I thought of making it completely digital, but this is awesome. Completely updates the interior lighting.
    -- Julz

  3. #103
    Senior Member knightjp's Avatar
    Join Date:  Nov 2011

    Posts:    187

    Does anyone have a before and after picture of the whole interior after this lighting conversion is done???
    -- Julz

  4. #104
    Senior Member robvanderveer's Avatar
    Join Date:  May 2011

    Location:  Netherlands

    Posts:    612

    My VIN:    3695

    Club(s):   (DCN)

    Quote Originally Posted by knightjp View Post
    This is definitely an excellent thing to do for the interior. I know the Delorean's interior can seem dated. I thought of making it completely digital, but this is awesome. Completely updates the interior lighting.
    I've got this installed on my car, and I wish I didn't. It's a $100 kit, not very easy to install, and the effect is moderate. Better wait what the poster's project turns out to be!

  5. #105
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by knightjp View Post
    This is definitely an excellent thing to do for the interior. I know the Delorean's interior can seem dated. I thought of making it completely digital, but this is awesome. Completely updates the interior lighting.
    Quote Originally Posted by robvanderveer View Post
    I've got this installed on my car, and I wish I didn't. It's a $100 kit, not very easy to install, and the effect is moderate. Better wait what the poster's project turns out to be!
    Yes, PLEASE DO NOT bring that EL kit back into this thread. It is in NO WAY related to what I am building. What I'm building will be leaps and bounds better than that product.
    Jim Reeve
    DMC6960

  6. #106
    Senior Member knightjp's Avatar
    Join Date:  Nov 2011

    Posts:    187

    Quote Originally Posted by dmc6960 View Post
    Yes, PLEASE DO NOT bring that EL kit back into this thread. It is in NO WAY related to what I am building. What I'm building will be leaps and bounds better than that product.
    Alright, we wont. But please be sure to post pics afterwards. I'm really waiting to see the finished thing.
    -- Julz

  7. #107
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by knightjp View Post
    Alright, we wont. But please be sure to post pics afterwards. I'm really waiting to see the finished thing.
    Then be prepared to wait at least a year. I do plan to have some type of prototype available for viewing at DCS this year.
    Jim Reeve
    DMC6960

  8. #108
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Minor update

    I do have about half the vector characters completed. I will post about them once they are all done. Stepper motor programming is taking a break while I do this. Once all the complete vector graphs are done, I will have a full set printed in the backlighting decal material I already have samples from. These will become the base for my prototype viewable at DCS.

    After all that is done, I will purchase spare oil and temp sensors and maybe a Saab fuel sender to start writing the programs for those gauges.

    Are we having fun yet?
    Jim Reeve
    DMC6960

  9. #109
    Senior Member 1batt4u's Avatar
    Join Date:  May 2011

    Location:  Queens, NY

    Posts:    1,307

    My VIN:    2964

    How r things going??
    Billy C. VIN: 2964

    "Trying to Live the Dream!"

    "If you're gonna own a DeLorean, why not build it with some style?"

    http://www.facebook.com/billy.chingas.7

  10. #110
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Slow and steady wins the race. Nah, its just slow because I refuse to pay anyone else to do what I can mostly do myself. Things are going fine, no new problems, but nothing new to report. Still working on the graphics.

    Also pondering getting a vendor booth at DCS to display the prototype. However these will NOT be for sale at DCS, still probably a year out on that.
    Jim Reeve
    DMC6960

Page 11 of 22 FirstFirst ... 9 10 11 12 13 21 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •