FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #34
    Rick/AKA.. DA BEARD congerz83's Avatar
    Join Date:  May 2011

    Location:  Congers NY

    Posts:    188

    My VIN:    SCEDT26T5BD06996

    Club(s):   (DMA)

    Quote Originally Posted by stevedmc View Post
    all he wants to do is bitch and moan.
    Really? Just because I don't kneel at the pulpit, you describe my posts as bitching and moaning?

    I have tried to remain very objective in my "review" of the set-up. I've kept it respectful and polite. There are a few here who know the WHOLE story, but again, I've decided to keep it "on the inside"....at least for now. I've asked for help here, and have received help. You in particular have been helpful, Steve. So has Farrar. So lets not start taking pot-shots.

    As far as me diagnosing the problem, my conversion was done on a working K-Jet engine. It wasn't one that had been sitting around for 20 years. I drove the car all the time. I know how my car ran before, and I know what was different after the conversion. I know what caused these issues and it's not ignition. That doesn't mean I blame Bill or anyone else for that. I also fully admit if I had better knowledge of carburetors I'd be able to address this issue better. So the only person to blame for that is myself.

    Again, objectivity has been my goal. Am I 100% satisfied with my conversion? No. Is it my fault? Yes. Can I get the carb to perform better with knowledge here and help from others? Yes.

    They're may be more people that feel the way that I do about their conversion, but it seems this thread only attracts the carb disciples, and those who choose to criticize. I realize I'm generalizing, but that's my opinion. It feels like an objective voice is not allowed here without getting clobbered... or accused of "bitching and moaning".

    There are also a few with K-Jet owners that are gracious to help me out with their knowledge of carburetors. (Ron comes to mind)

    I just recieved Bill's e-mail this morning with info for the new site. I felt that because I haven't been proudly waving the CARB flag, I was being ommited from the URL. So Bill came through with that info in the end, and perhaps I may've been fired of too quick. I was not excluded, but I did recieve the e-mail after everyone else.

    I have no personal problem with Bill whatsoever. He's been generous to me in many ways. But I'm not going to be doing "cart-wheels for carbs" until I feel totally satisfied. I feel that that is only fair.
    Last edited by congerz83; 02-11-2012 at 11:00 AM.
    "He that hath a beard is more than a youth, and he that hath no beard is less than a man"
    - William Shakespeare

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •