FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 13 of 22 FirstFirst ... 3 11 12 13 14 15 ... LastLast
Results 121 to 130 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #121
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by DMC5180 View Post
    I have a new AD in reserve. I can do precision measurements for you if that would work.
    Yes, precision measurements would work. Looking for the length and diameter of the shaft that seats inside the hub nut, the with and depth of the groove for the circlip, and the diameter of the circlip itself. Thanks!
    Jim Reeve
    DMC6960

  2. #122
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Well as usual, now that I need it for something I can't locate it. Funny thing is I ran across it while reorganizing the garage 6 mo ago. Dang it !

    Sorry about that.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  3. #123
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Its all good.

    In other news, here are some of the completed number characters...

    0.jpg 1.jpg 3.jpg 5.jpg 8.jpg

    And of course after looking at them all lined up right now, I may need to make adjustments to the middle of the 3 and 8 (slightly raise upward). We'll see though.

    Hope to have the rest done by the end of this week. Then next week, drawing a whole gauge...
    Jim Reeve
    DMC6960

  4. #124
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Decided to look in one more place on hunch and found the AD this morning. I have it with me and will get you those numbers this evening.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  5. #125
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    More Numbers...

    2.jpg 6.jpg 7.jpg

    Now the 9. Not a very important number. No possible configuration other than a BTTF 95mph unit would use one. Just in case though, I tried two things...

    First, I tried just flipping the 6 so the 9 is a direct mirror of it...
    9-2.jpg

    Then I also tried manipulating the closed loop so it would vertically be the "smaller" loop since it is the TOP loop on the 6 and 8 which is smaller than the bottom...
    9-1.jpg

    At first, the mirror 9 didn't look right, so I created the modified one. But now comparing the two with the other numbers, the mirror one is probably the better one. Thoughts?

    All I have left now is the 4, then I can get some of the letter characters done. Here is everything so far...

    0.jpg 1.jpg 2.jpg 3.jpg 5.jpg 6.jpg 7.jpg 8.jpg 9-2.jpg 9-1.jpg
    Last edited by dmc6960; 03-14-2012 at 02:47 AM. Reason: Forgot the 0 in the final lineup
    Jim Reeve
    DMC6960

  6. #126
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Jim, check your PM's and E-mail
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  7. #127
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dmc6960 View Post
    At first, the mirror 9 didn't look right, so I created the modified one. But now comparing the two with the other numbers, the mirror one is probably the better one. Thoughts?
    I agree. In context, the flipped 9 doesn't look out of place at all. Nice work as always!
    3.0L, automatic, carbureted

  8. #128
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,432

    My VIN:    05457

    I like the mirrored one best as well.
    David Proehl

  9. #129
    Senior Member Jack's Avatar
    Join Date:  May 2011

    Posts:    237

    My VIN:    10110

    Club(s):   (SEDOC) (DCUK)

    I may have messed the post referencing this, but what are the numbers for and why do they need to be remade/customized?
    If these are vector images I could help you make whatever you need.

  10. #130
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by Jack View Post
    I may have messed the post referencing this, but what are the numbers for and why do they need to be remade/customized?
    If these are vector images I could help you make whatever you need.
    All you really need to read is the first post of the thread. In short though, I'm building an electronically controlled and backlit instrument cluster. New decals need to be printed for the gauges, and there is no perfect match for the typeface used. Therefore, I'm recreating all of them by hand using high resolution scans and measurements. They are vector drawings, as will be the final layout before its handed off to the specialized printers.

    Thanks for the offer to help, but I'm almost done.
    Jim Reeve
    DMC6960

Page 13 of 22 FirstFirst ... 3 11 12 13 14 15 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •