Finished the 4. All numeral characters for the cluster are complete. They are all based off of the speedometer and tachometer numbers. All secondary numbers (kph and small gauges) use identical typeface just scaled smaller.
Quick summary...
All characters are 3mm wide by 5.6mm tall. Exceptions are the 1, which is 1.6mm wide, and the 4, which is 3.5mm wide. Majority of the line widths are approximately .8mm with several exceptions. The radii used on the 0 does NOT completely match the other character's radii, but is close. The vertical portion of the 0 is perfectly strait with no radii, and all other characters have a very slight radii in most of their vertical portions. Characters with dual loops (3,5,6,8 ) have a larger radii on the bottom loop than the top loop. The 5 and 6 have a much larger bottom radii than the bottom of the 3 and 8. The 9 does not exist on any OEM design, 85mph, 140mph, or metric.
I will now work on drawing out all the letters. MPH, km/h, RPM/100, VOLTS, TEMP, OIL, FUEL.
If anyone has high resolution pictures or vector graphics of the common automotive icons for Battery, Temp, Oil, and Fuel; it would be very helpful. I'm not looking forward to drawing those especially since they exist identically everywhere. There must be a good source for them.
The final lineup....
0.jpg 1.jpg 2.jpg 3.jpg 4.jpg 5.jpg 6.jpg 7.jpg 8.jpg 9-2.jpg


Reply With Quote
