Quote Originally Posted by DMC5180 View Post
Did those pads come with anti-squeal shims?
No. I have been recommended to use something called BG Stop Squeal. They say you put it on and it takes about fifteen minutes to dry, or more if it's cooler or humid, so you apply it to the pads and let it dry while you get the wheels and old pads out.

Quote Originally Posted by DMC5180 View Post
It is recommended that when you push the pistons back, you open the bleeder and drain the Old fluid out rather than push back up the system then Do fresh fluid bleed.
This is why I bought a big bottle of DOT 4.

Quote Originally Posted by stevedmc View Post
A c clamp works good too for pushing the pistons back in. I have two in my tool bag.
Yep. You use the C-clamp and old brake pad to compress the piston (or pistons if there's more than one per caliper) and open the bleeder screw.

I have been preparing for this job by watching YouTube.