FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 96 of 954 FirstFirst ... 46 86 94 95 96 97 98 106 146 196 596 ... LastLast
Results 951 to 960 of 9533

Thread: What have you done to your DeLorean today?

  1. #951
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    521

    My VIN:    3462

    Club(s):   (DOI)

    Quote Originally Posted by MML View Post
    Big day for me today! I took the D out for its maiden voyage. That was its first time actually on the road since I got it.

    The insurance paperwork finally arrived, which coincided with all the fuel lines being replaced, so I couldn't wait any longer, and out the gate I went.
    Nothing prepared me for the experience. It all kicked off when I went to get petrol, two people wander over and start asking about it. Just about everyone you pass on the road was checking it out; I was terrified someone would bump into me while not paying attention to their driving.

    How the hell do you long-time owners cope!!
    The first week I had my car, some jackass pulled out across the road right in front of me....I had to slam on the 30 year old brakes (which were not working that well!) and ended up on the gravel shoulder! I decided to ALWAYS drive with the headlights on after that one!

    As for what I did today....I removed the large gear from the lambda counter and cleaned out about two pounds of grease! Hopefully this helps my bouncing speedo issue

  2. #952
    Senior Member MML's Avatar
    Join Date:  Sep 2011

    Location:  County Donegal, Ireland

    Posts:    697

    My VIN:    5436

    Club(s):   (DOA) (DCUK) (DOC-UK)

    Quote Originally Posted by John U View Post
    The first week I had my car, some jackass pulled out across the road right in front of me....I had to slam on the 30 year old brakes (which were not working that well!) and ended up on the gravel shoulder! I decided to ALWAYS drive with the headlights on after that one!
    Oh jeez... I'm gonna have nightmares now... I'm absolutely paranoid about something like that happening!

  3. #953
    Stuck in the 80s John U's Avatar
    Join Date:  May 2011

    Location:  Kitchener, Ontario

    Posts:    521

    My VIN:    3462

    Club(s):   (DOI)

    I guess that is what car insurance is for..........

  4. #954
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    Quote Originally Posted by MML View Post
    Oh jeez... I'm gonna have nightmares now... I'm absolutely paranoid about something like that happening!
    Congrats on your maiden voyage. Your concern is felt by many of us (I believe), or at the very least, by me. I've struggled for quite a while with whether I really like having the car. There are many factors here, but the best way to describe it is: I have really enjoyed owning the car, but I rarely enjoy driving the car. That just occurred to me for the first time a couple weeks ago, and it was unfortunately the first time I then started to consider selling it. Hard to explain all the reasons why, but if I have a car I am happier with when parked versus out on the highway, it might be time to pass the torch to someone else. Not sure how that story is going to end...


    Sept. 81, auto, black interior

  5. #955
    Senior Member DrJeff's Avatar
    Join Date:  Feb 2012

    Location:  Houston TX

    Posts:    601

    My VIN:    6313

    Trying to get the window glass to release from the window carrier

    I need to get the glass separated from the carrier so that I can reposition the glass (about 1/2 inch too far forward). I can't tell if it's 30 year old window putty or some more modern adhesive, but I can't get the carrier to release the window glass. I soaked it in Goo-Be-Gone, WD40, Turpentine, and then Goo-Be-Gone again. Hopefully one of those three will loosen it up over night, or dissolve the whole thing. Either way that glass is coming out.

    Jeff #6313

  6. #956
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,590

    My VIN:    06960

    Quote Originally Posted by DrJeff View Post
    I need to get the glass separated from the carrier so that I can reposition the glass (about 1/2 inch too far forward).
    I just did this! See post #928 in this thread. You want lacquer thinner and an extremely thin kitchen knife (be aware it probably aint going back into the kitchen). The laquer thinner really weakens the adhesive until it evaporates, then you have to soak it again. While it is weak, get the knife in both sides of the channel where the window is glued in. Eventually you'll get enough cut out that the rest of the adhesive when soaked will gradually give away with pressure (or tension) separating the glass from the guide.

    Good luck.
    Jim Reeve
    DMC6960

  7. #957
    DMC Midwest - 815.459.6439 DMCMW Dave's Avatar
    Join Date:  May 2011

    Location:  Taylors SC

    Posts:    5,327

    My VIN:    (former)05429

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by DrJeff View Post
    I need to get the glass separated from the carrier so that I can reposition the glass (about 1/2 inch too far forward). I can't tell if it's 30 year old window putty or some more modern adhesive, but I can't get the carrier to release the window glass.

    Jeff #6313
    Careful use of a propane torch works well too. Heat it just to where the glue starts to smoke.
    Dave S
    DMC Midwest - retired but helping
    Greenville SC

  8. #958
    Senior Member Dangermouse's Avatar
    Join Date:  May 2011

    Location:  Atlanta OTP GA

    Posts:    7,085

    My VIN:    2743

    Club(s):   (SEDOC) (DCH) (DCUK) (DOC-UK)

    Quote Originally Posted by MML View Post
    Oh jeez... I'm gonna have nightmares now... I'm absolutely paranoid about something like that happening!
    Oh, don't worry Martin, nothing would happen at a gas/petrol station (certainly not to a car hand built by the owner and out for its maiden voyage - oh, wait; why does that sound familiar?). (Headphones ON, folks watching at work, btw)

    Dermot
    VIN 2743, B/A, Frame 2227, engine 2320

    I don't always drive cars, but when I do, I prefer DeLoreans

    http://www.will-to-live.org

    No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"

  9. #959
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Dangermouse View Post
    Oh, don't worry Martin, nothing would happen at a gas/petrol station...
    The only time my old Concorde was in collisions was when it was parked -- swiped by a drunk driver while parked on the street (twice), and backed straight into by an idiot woman's Nissan XTerra.

    BTW, nice how he swears like a sailor as the man walks by with his three young boys. Oops -- but understandable!
    3.0L, automatic, carbureted

  10. #960
    Junior Member
    Join Date:  Jun 2011

    Location:  Springfield MO

    Posts:    27

    My VIN:    10439

    Quote Originally Posted by Farrar View Post
    The only time my old Concorde was in collisions was when it was parked -- swiped by a drunk driver while parked on the street (twice), and backed straight into by an idiot woman's Nissan XTerra.

    BTW, nice how he swears like a sailor as the man walks by with his three young boys. Oops -- but understandable!
    Today I replaced all the door lights with LED's, replaced all 4 headlights and replaced all the switches (defrost,windows and the two dummy switches.

Page 96 of 954 FirstFirst ... 46 86 94 95 96 97 98 106 146 196 596 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •