FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 16 of 22 FirstFirst ... 6 14 15 16 17 18 ... LastLast
Results 151 to 160 of 220

Thread: Backlit Electronic Instrument Cluster

  1. #151
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    General Quick Update

    Nothing majorly new to report. I'm working on the vector graphics for the other gauges right now. Even if I cannot complete a working prototype by DCS I'd still like to have some sample decals printed up to bring with, and perhaps one or two example gauges showing how they will work.

    I've also recently purchased from DMCMW a new left front hub nut and retaining ring. The idea here is I'll attach the new speed sensor in the same fashion that the angle drive is attached. Then I can quickly swap it onto my car once its ready to real road testing. This will also be how the part is provided with the new cluster.

    I've also purchased an engine water temp sensor for the temp gauge. I will use this to calibrate the temp gauge function.

    I'm also now working on basic circuit design layout for each individual function. Once proven out individually for the prototype, they will be combined for the final design.

    While it may still be at least a year before these can be sold, I may be looking to have a few real-world test mules installed into cars across different parts of the country by the end of this year. These will need to be heavily used cars in all weather conditions. More info on this after I have the first working prototype.
    Jim Reeve
    DMC6960

  2. #152
    Junior Member
    Join Date:  Apr 2012

    Posts:    1

    Quote Originally Posted by dmc6960 View Post
    More Numbers...

    All I have left now is the 4, then I can get some of the letter characters done. Here is everything so far...

    Attachment 8951 Attachment 8947 Attachment 8943 Attachment 8948 Attachment 8949 Attachment 8944 Attachment 8942 Attachment 8950 Attachment 8946 Attachment 8945
    One small suggestion:

    When designing fonts, it is standard to slightly increase the size of characters with curved tops or bottoms and make them extend slightly higher and/or lower than the characters with flat tops/bottoms. So, for example, the numeral "0" should actually extend slightly below the baseline and be slightly taller than, say, the numeral "1". This is called "overshoot" and is done to compensate for an optical illusion that makes the curved edges look like they are not properly lined up. The usual overshoot is about 1.5%. You can read about it here:

    http://www.typographydeconstructed.com/baseline/
    --Pete Lucas
    VIN #06703

  3. #153
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Quote Originally Posted by avanti View Post
    One small suggestion:

    When designing fonts, it is standard to slightly increase the size of characters with curved tops or bottoms and make them extend slightly higher and/or lower than the characters with flat tops/bottoms. So, for example, the numeral "0" should actually extend slightly below the baseline and be slightly taller than, say, the numeral "1". This is called "overshoot" and is done to compensate for an optical illusion that makes the curved edges look like they are not properly lined up. The usual overshoot is about 1.5%. You can read about it here:

    http://www.typographydeconstructed.com/baseline/
    I can see exactly what you mean. I may do this, thanks for the info!
    Jim Reeve
    DMC6960

  4. #154
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dmc6960 View Post
    I may be looking to have a few real-world test mules installed into cars across different parts of the country by the end of this year. These will need to be heavily used cars in all weather conditions. More info on this after I have the first working prototype.
    As soon as I have a/c again I plan to drive my car in all kinds of weather. I will also be re-doing my console and kneepads in the future and that would be a good time for me to install a new cluster. If you need a test mule in a hot and humid area of the U.S., let me know... otherwise I look forward to watching the progress continue to unfold here.
    3.0L, automatic, carbureted

  5. #155
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by dmc6960 View Post
    While it may still be at least a year before these can be sold, I may be looking to have a few real-world test mules installed into cars across different parts of the country by the end of this year. These will need to be heavily used cars in all weather conditions. More info on this after I have the first working prototype.
    I'm planning to drive 10k miles this year and have logged 2,600 miles so far for the year. I'm game if you need a southern redneck to test one.

  6. #156
    Senior Member 1batt4u's Avatar
    Join Date:  May 2011

    Location:  Queens, NY

    Posts:    1,307

    My VIN:    2964

    Anything new?
    Billy C. VIN: 2964

    "Trying to Live the Dream!"

    "If you're gonna own a DeLorean, why not build it with some style?"

    http://www.facebook.com/billy.chingas.7

  7. #157
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Currently getting quotes for the decal printing, and to also have one hopefully printed up before DCS. Unfortunately there will not be a complete prototype ready for DCS. If I can get a prototype decal printed before DCS I will rig it up with some lights to give a good impression of the backlighting for people to see at the show. I'll also have all of my bits and pieces with for people to see the replacement for the angle drive, etc.

    Work on my own car is taking up too much time to get everything else I wanted done. But oh well. I will be selling them for sure at DCS '14.
    Jim Reeve
    DMC6960

  8. #158
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    New Images to Share

    Been quickly finishing the vector images for the gauge faces. What I'm doing now is NOT final. There may be tweaking of positioning still happening. I also will further refine the characters to reflect the 1.5% baseline extension on the curved characters. Right now I'm just quickly finishing what I can so I can get accurate printing quotes and still hopefully a prototype printed before DCS.

    Here is a Speedometer and Tachometer. I have now removed the 2ยบ CCW shift the stock speedo has.

    Speedo.jpg Tachometer.jpg
    Jim Reeve
    DMC6960

  9. #159
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    those look great, jim!
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  10. #160
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Fuel Gauge

    Who would have thought finding a high resolution image or vector image of the STANDARD International Automotive Fuel Gauge symbol would be so hard?

    Well it is. So I have to make my own. Spent less than an hour making the gauge, including the characters for FUEL. Then the entire rest of the evening drawing out the fuel icon by hand. I do think though the results speak for themselves....

    fuel.jpg

    "UNLEADED FUEL ONLY" will follow later for the final prints. Since its an irrelevant statement these days, perhaps I'll have an option to omit it. I know the metric cluster has the bottom segment in red, does it still carry the Unleaded text?
    Jim Reeve
    DMC6960

Page 16 of 22 FirstFirst ... 6 14 15 16 17 18 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •