I'm currently installing a 3rd taillight myself, but the process I'm going through is vastly different to what I'm reading here. I'm taking pictures as I go for documentation... should I post my method as a separate how-to when I finish it up?

My method seems to be ten times easier than what I'm finding here. The only tools required using my method are a screwdriver, wire strippers, crimpers, wire, electrical tape, aaaand that's it. No wrench, no pliers, no stick, no fuse even, yet it'll function just as well as the one described here, and it isn't preferential to one side vs. the other. Pictures will be high-res too.