FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 105 of 111 FirstFirst ... 5 55 95 103 104 105 106 107 ... LastLast
Results 1,041 to 1,050 of 1102

Thread: Farrar's car blog

  1. #1041
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Saturday morning I will begin tearing into the area under the dashboard, and Pimp Daddy Rice will join me later in the morning to make sure I don't mess anything up.
    I'll be sure to impress your new neighbors with my work uniform.

  2. #1042
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by stevedmc View Post
    I'll be sure to impress your new neighbors with my work uniform.
    I may be wearing my DeLorean Motor Company coveralls. Depends on the weather.
    3.0L, automatic, carbureted

  3. #1043
    Aussie Member
    Join Date:  Feb 2012

    Location:  Adelaide

    Posts:    944

    My VIN:    6679

    Quote Originally Posted by Farrar View Post
    I am excited to finally get something done on this car!
    In the dark? Or have you changed that light bulb?

  4. #1044
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Tillsy View Post
    In the dark? Or have you changed that light bulb?
    The rain should hold off long enough for my girlfriend to help me push the car forward out of the garage so I can change the bulb, then back into the shade again. I am hopeful that the rain should hold off long enough, anyway.
    3.0L, automatic, carbureted

  5. #1045
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quick update - 6:35pm

    Halfway through evaporator replacement! Got the box out and disassembled. Now to sand the rusty flaps so I can get new foam to adhere before re-assembling the box with the new evaporator core, etc.
    3.0L, automatic, carbureted

  6. #1046
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    So that's whats you taking so long to get back down here. Someone is playing in the computer.

  7. #1047
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Good thing Steve posted, else this post would have been combined with my previous one regardless of timestamp.

    Quick update since it's past my bedtime: We shut down a little after 9pm.

    New foam from Home Depot is on the flaps -- they were rusty and had to be sanded and sprayed clean, but the foam adhered fine and I think it makes a good seal.

    The sealing tape supplied with the kit from DMCMW was more than enough to do the job.

    The evaporator is installed, but the heater core lines are not.
    The accumulator is installed but fittings have not been 100% tightened yet.

    Steve left me his vacuum pump. Later this week -- probably this weekend -- I will tighten down those fittings and vacuum out the system one evening, then leave it overnight and check the vacuum reading in the morning.

    If we did the work correctly, then I should have amazing a/c when this is all done -- with the exception of the condenser, everything in the system will be less than two years old (I started buying the parts for this project about two years ago with the hoses and compressor; the most recent purchase was the evaporator kit from DMCMW).

    I *do* need help adapting this early-style system to accommodate a high-pressure switch and high-pressure release valve, which were provided in the kit I received but are not shown in the workshop manual. If someone could tell me how to install it in my system, that would be most excellent.

    Thanks again to Steve for all his help. I hope the ice cream made it worth the trip.

    I am tired but happy -- a welcome combination of feelings. I feel like I accomplished something important today!
    3.0L, automatic, carbureted

  8. #1048
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by Farrar View Post
    ...I am tired but happy -- a welcome combination of feelings. I feel like I accomplished something important today!
    good deal, glad you could finally get some work done on the D again.
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  9. #1049
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Good thing Steve posted, else this post would have been combined with my previous one regardless of timestamp.

    Quick update since it's past my bedtime: We shut down a little after 9pm.

    New foam from Home Depot is on the flaps -- they were rusty and had to be sanded and sprayed clean, but the foam adhered fine and I think it makes a good seal.

    The sealing tape supplied with the kit from DMCMW was more than enough to do the job.

    The evaporator is installed, but the heater core lines are not.
    The accumulator is installed but fittings have not been 100% tightened yet.

    Steve left me his vacuum pump. Later this week -- probably this weekend -- I will tighten down those fittings and vacuum out the system one evening, then leave it overnight and check the vacuum reading in the morning.

    If we did the work correctly, then I should have amazing a/c when this is all done -- with the exception of the condenser, everything in the system will be less than two years old (I started buying the parts for this project about two years ago with the hoses and compressor; the most recent purchase was the evaporator kit from DMCMW).

    I *do* need help adapting this early-style system to accommodate a high-pressure switch and high-pressure release valve, which were provided in the kit I received but are not shown in the workshop manual. If someone could tell me how to install it in my system, that would be most excellent.

    Thanks again to Steve for all his help. I hope the ice cream made it worth the trip.

    I am tired but happy -- a welcome combination of feelings. I feel like I accomplished something important today!
    Don't believe anything Farrar says. I drove out there, replaced a light bulb, and then went home.

  10. #1050
    Aussie Member
    Join Date:  Feb 2012

    Location:  Adelaide

    Posts:    944

    My VIN:    6679

    Quote Originally Posted by stevedmc View Post
    Don't believe anything Farrar says. I drove out there, replaced a light bulb, and then went home.
    You didn't fit a carburetor to the light fitting?

Page 105 of 111 FirstFirst ... 5 55 95 103 104 105 106 107 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •