FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member

Originally Posted by
Farrar
If this works, I may recommend to Dave M that he could use the above-referenced circuit breakers in his fan fail module replacement, thus negating the need for the factory circuit breaker -- they make "mini-blade" versions which will fit. (In my opinion, one breaker for each fan is better than one breaker for both fans.)
Farrar
I think a fuse is more reliable and produces less heat than a circuit breaker. As long as you don't have fan problems your fuse should never blow. I do recommend you remove the 40 amp breaker when you have each fan fused. Even if you just have the fan fail fused jumpers, get rid of that breaker.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules