FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 9 of 111 FirstFirst ... 7 8 9 10 11 19 59 109 ... LastLast
Results 81 to 90 of 1102

Thread: Farrar's car blog

  1. #81
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Bitsyncmaster View Post
    Only the ends of the wrap have sticky stuff. It's not hard at all to unwrap the harness.
    That's good to know!

    For re-wrapping, my mother* pointed out something she thought would come in useful: silicone tape. It says that it has no adhesive, but bonds to itself with time and temperature. Would that be appropriate for wrapping a wiring harness, or would it be too much of a pain to remove in the future? Are you familiar with this material?

    Farrar

    *Yes, my family members appreciate and encourage my hobby. I'm a lucky man.
    3.0L, automatic, carbureted

  2. #82
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    you could ask Chris 16409 as well... he mentions in this post about replacing all electrical tape with silicone tape.

  3. #83
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,600

    My VIN:    03572

    Most of the harness tape has nothing with glue on it. You wrap it tightly with a little stretch and is sticks to itself. You may want to use a small piece of tape at the ends.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  4. #84
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by dvonk View Post
    ...he mentions in this post about replacing all electrical tape with silicone tape.
    please omit the word 'all' from my previous post, i thought i had but now its too late to edit it.

  5. #85
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,590

    My VIN:    06960

    This is the tape I used for such re-wrapping....



    http://www.amazon.com/Techni-Tool-Ta.../dp/B001MX0XL0
    Jim Reeve
    DMC6960

  6. #86
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Thanks all for the tape tips. I'll be using either cold-shrink or wire loom.

    New thought: Anyone investigated these for their DeLorean?

    070100.jpg

    Looks like if I wanted to use these, I'd end up buying "H4" bulbs for low-beam and "H4HW" for high-beam... is that correct?

    Farrar
    3.0L, automatic, carbureted

  7. #87
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,401

    My VIN:    16409

    Silicone Tape

    I wasn't sure where to find wiring loom tape, and finding silicone tape is a bit tricky as well. I was wondering why some of the harness wasn't a sticky mess with the original wrapping. It was only where electrical tape was used that I found the old sticky adhesive. I also rewrapped most of my engine bay wiring with silicone tape. There was a lot of electrical tape there. I wish I would have thought about wiring loom tape, it may have been cheaper. Anyhow, the silicone tape gives good results. Now, I did not know about that cold shrink tape. I wonder where you can get it locally?
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  8. #88
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,590

    My VIN:    06960

    Quote Originally Posted by Chris 16409 View Post
    Now, I did not know about that cold shrink tape. I wonder where you can get it locally?
    Bought mine at O'reilly's. And I *think* I've seen it at AutoZone as well.
    Jim Reeve
    DMC6960

  9. #89
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    My silicone tape came out of a catalogue: "Duluth Trading Company," I think. So if you can't find it locally, that's one option. I got a big multi-color pack so I can wrap different harnesses in different colors.

    Farrar
    3.0L, automatic, carbureted

  10. #90
    One of those purists you keep hearing about. sdg3205's Avatar
    Join Date:  May 2011

    Location:  Vancouver, BC

    Posts:    3,388

    My VIN:    thirty two 'o five

    Club(s):   (PNDC)

    How's the heater core/evaporator install going, Farrar?
    Dave

    Here, somewhere.


Page 9 of 111 FirstFirst ... 7 8 9 10 11 19 59 109 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •