Hi Rhye,
Tried writing you, but you have apparently exceeded your storage allowance. Just wanted to say thanks.
Posts: 25
Hi Rhye,
Tried writing you, but you have apparently exceeded your storage allowance. Just wanted to say thanks.
Update, finally. Here's how the new laser-engraved decal insert looks. Could't force my camera to focus on a graphics - it's actually very clear and sharp. Not invisible anymore (it's white in a daylight), but FAR less problematic in assembly and looks more professional (at least in my opinion). For those who prefer a 100% stock look, I'm going to offer no backlight option in the future.
One more change: the backlight source is now only after ignition switch (draws only around 0.9 mA so it won't hurt).
2 weeks more and the V1.32 batch should be ready for shipping.
IMG_20220924_211258472.jpg IMG_20220924_211811554.jpg
Location: Cookeville, TN
Posts: 325
My VIN: 628
Club(s): (SEDOC) (DCUK)
That's badass!
Posts: 301
My VIN: 02855
Club(s): (NCDMC) (DCUK)
How to order one of these switches?
I definitely would like to get one but didn't know if it could be done with blue backlighting since I did all custom blue lighting inside my car.
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!
Vin 11035 wide stripe, flat hood, 5 speed, Spec 1 exhaust, custom grey/black interior, custom lighting, custom stereo and custom alot of stuff!