View Full Version : Quick AC question
Giamanut
10-21-2019, 11:50 PM
Low pressure port is
A) center on the back of ac compressor?
Or
B) outboard on the back of the AC compressor?
On the back plate, there should be a large "S" = Suction = Low Side, and a large "D" = Discharge = High Side.
The "D" is USUALLY in the center as in the pic in this post:
http://dmctalk.org/showthread.php?17562-Trying-to-fill-A-C-system-blows-hot-air-and-high-side-has-low-pressure&p=248725&viewfull=1#post248725
Giamanut
10-22-2019, 08:12 AM
On the back plate, there should be a large "S" = Suction = Low Side, and a large "D" = Discharge = High Side.
The "D" is USUALLY in the center as in the pic in this post:
http://dmctalk.org/showthread.php?17562-Trying-to-fill-A-C-system-blows-hot-air-and-high-side-has-low-pressure&p=248725&viewfull=1#post248725
Thanks Indeed it is! sorry got lazy for a minute.
To further add to this thread, the High side is the small hose, and the low side is the large hose.
Giamanut
10-23-2019, 12:15 AM
To further add to this thread, the High side is the small hose, and the low side is the large hose.
Yep just wanted to double check!
Got another question that I am not to concerned about yet but!
Just did a fuel pressure check Engine off 40F and got 25 psi control and 80 main held 40 psi after disconnecting the Fuel pump Jumper for at least 20 mins.
Does this sound about right?
Giamanut
10-23-2019, 06:44 AM
Yes, good readings!
Awesome thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.