Mine too :)
I need to replace my hot water valve as well; I managed to break that stupid brittle vacuum line connection on mine while I was re-assembling my top end.
Steve, just a thought here -
Last week I drive down to DMC NW from Vancouver to pickup some parts from Toby. I get down there and low and behold there is a pool of coolant under the car. After one cooling system incident last year I watch it like a hawk.
It turns out one of my heater hoses (that I installed over a year ago) was occasionally rubbing on the axle boot. When Toby and John cleared out their shop and put the car up on the lift (they deserve their own appreciation thread just for this btw!) you could clearly see there was too much slack in the heater hose (the one that leaves the heater valve bound to the heater core). Even with a little pull it would extend well below the axle if given the opportunity.
My point is that you should check and ensure your hose isn't getting caught up or tugged by the axle or axle boot. It seems to me it could be enough pressure over time to weaken plastic on the heater valve.
Total expenses to date: $245.5016
Expense #1 (Radiator Leak) - January 7, 2012 - 44,079 Miles - Total Cost: $117.83 (including tax)
Expense #2 (Radiator Leak) - January 15, 2012 - 44,386 Miles - Total Cost: $7.40 (including tax)
Expense #3 (Replaced windshield wipers) - January 15, 2012 - 44,386 Miles - Total Cost: $17.54 (including tax)
Expense #4 (Oil Change) - January 21, 2012 - 44,643 Miles - Total Cost: $24.4616 (including tax)
Expense #4 (Reinstalled steering column bushing) - January 22, 2012 - 44,693 - Total Cost: $1.35 (including tax)
Expense #5 (bought coolant and water) - February 20, 2012 - 45,000 - Total Cost: $11.88 (including tax)
Expense #6 (replaced rear interior light) - February 23, 2012 - 45,500 - Total Cost: $31 (no tax and free shipping courtesy of Farrar)
Expense #7 (replaced heater control valve) - March 4, 2012 - 45,766 - Total Cost: $10.39 (including tax)
Expense #8 (bought more coolant/water) - March 7, 2012 - 45,766 - Total Cost: 23.65 (including tax)
I dropped off my leaky radiator at a repair shop a few days ago and still haven't heard back from them. Hopefully they are repairing and testing it for free since I suspect it wasn't fixed right the first time.
Anyway, since I drained the coolant out of the system and have no spare coolant laying around the house I decided to make the trip to Wally World to purchase 2 gallons of coolant and 2 gallons of distilled water. The stuff is sitting in the back of my Geo Metro right now, waiting for the moment it gets mixed and put into the Delorean.
I just got off the phone with the radiator shop and the thing is ready to be picked up. I think I know what I will be doing tonight. Wish me luck.
And in June you will be glad that you don't factor fuel cost in your modest budget. ;)
Well, I got the radiator mounted but it was getting too dark to finish up so I called it quits for the night. Today after work I plan to finish connecting the hoses, tighten everything, fill the system with tap water, and then pressure test and drive the thing a little bit.
After I have verified there are no leaks, I will drain the water, blow the system out with compressed air, and then fill it up with coolant and distilled water.
I am not putting my precious coolant in this thing until I know it is leak free.
I do have a few concerns about their recent repair. My dad went and picked up the radiator for me and I was shocked to see how dirty it was and that they used some sort of expoxy to do part of the repair this time. I really hope the thing holds.
The first repair looked so professional but it obviously wasn't fixed. The current repair looks so redneck. We will see if it lasts or not.